Question Is there a real difference between 16 gb and 20 gb of video ram for gaming

Page 2 - Seeking answers? Join the Tom's Hardware community: where nearly two million members share solutions and discuss the latest tech.
MSI Afterburner is an overclocking (and underclocking) tool compatible with all graphics cards. It also is compatible with AMD GPUs. This picture is of an NVIDIA GPU which has slightly different overclocking mechanics, but what I did is moved back the core clock slider 80MHz, and all problems left me instantly. Also, I core clock not memory.
afbr.jpg
 
  • Like
Reactions: artk2219
look up on YouTube about undervolting. You do it through the AMD software but you can set ram speeds, fan curves etc all right there.

View: https://youtu.be/2aCCaIx5Kk0?feature=shared


That one should give good info. I followed one of his videos regarding my xtx.
Speaking from my experience (also 7900-XTX) the reason to underclock is to tell the GPU to use more volts per clock speed (MHz). Undervolting I believe would act the opposite and cause it to perform less stably. But maybe that's the case.
 
  • Like
Reactions: artk2219
I have another problem that the moinitor is tearing the image but i have vsync on. I looked in the options of radeon rx 7900xt I had enhanced sync on. I don't know how else to fix the tearing issue. I really hate this card
 
  • Like
Reactions: artk2219
In my experience, Freesync helps more than enhanced sync (if your monitor supports it). I play at 1440 so tearing isn't generally an issue for me, also try capping your frame rate at 60hz might help, so you could give that a try too.
 
  • Like
Reactions: artk2219
I have already tried every suggestion to fix the problem. I can't get rid of the problem. It keeps saying Default performance tuning settings have been restored due to an unexpected system failure
Late to the party, but unstable RAM overclocks (including XMP et al) can result in this error.

EDIT: Make sure your system is running bone stock - including RAM - run the extended Windows Memory Diagnostic test on boot (hit the super key and type "Windows Memory Diagnostic"). Report back with the results.
 
Last edited:
  • Like
Reactions: artk2219
My mind is made up going to get 4080 super zotac video card
At this point i would just wait for the RTX 5000 and RX 9000 series to launch and then get a new GPU, its only weeks away. It sounds like you may have a bum card though, as other have suggested you can try a slight memory underclock, I guess XFX may have pumped the clocks a little too high on that model, or its using a bad batch of ram modules.