Question Is this a good build for Video Editing?

[Ab101]

Hi,

Hoping for some insight, considering building a PC for editing YouTube videos, here is the build so far - curious if there are any suggestions:

https://ca.pcpartpicker.com/list/CwMyxs

Thank you in advance!

 

[Lutfij]

Welcome to the forums, newcomer!

Why are you looking for a low profile cooler inside a chassis that will allow you to have a tower cooler? In fact you can avoid the 50CAD price tag of said cooler in favor of using the stock cooler. Swap the motherboard to a B550 chipset and get a DDR4-3600Mhz dual channel ram kit. Ditch the CV unit for a CX or rather something higher in pedigree from Corsair but you will need to up the wattage of said unit, to something like 650W at the very least. 750W would be best.

You might want to also looking to a secondary SSD or a larger mechanical drive or both to store your projects on.

 

[Lafong]

That case can accept coolers up to 150 mm

If you want a Noctua, look at the D12L (dual tower, 145 mm tall) or the U9S (single tower, about 125 mm tall I think).

Either is decidedly better than the low profile Noctua you chose.