hi
I have phenom II 955 and I took the heatsink off and touched some of the thermal paste by mistake so some of it was removed.
since then the temperatures rised about 4c idle and rised a lot on load, so i underclocked it to 2100 mhz and now the temperature reaches 60c after 5minutes of prime 95 and the fan if annoying
so i bought this cheap white thermal paste and this is some of what was written on it
ZP thermal compound
High Thermal Conductivity Low Bleed Stable
Uses: Thermal coupling of electrical device to Heatsinks
Thermal Conductivity: >1.22 W/m-k
Thermal Resistance: <0.20°C-in²/W
and I just want to know is it good,or will ac5 make a big difference cause I am not an overclocker
I have phenom II 955 and I took the heatsink off and touched some of the thermal paste by mistake so some of it was removed.
since then the temperatures rised about 4c idle and rised a lot on load, so i underclocked it to 2100 mhz and now the temperature reaches 60c after 5minutes of prime 95 and the fan if annoying
so i bought this cheap white thermal paste and this is some of what was written on it
ZP thermal compound
High Thermal Conductivity Low Bleed Stable
Uses: Thermal coupling of electrical device to Heatsinks
Thermal Conductivity: >1.22 W/m-k
Thermal Resistance: <0.20°C-in²/W
and I just want to know is it good,or will ac5 make a big difference cause I am not an overclocker