Is Unigine Valley Reporting Core Clock speeds Correctly?

[Itazura]

Hey there,

First of all, i'm running the below system:

Cpu: i7 4790k @ 4.7Ghz
GPU: Gigabyte GTX 970 G1 Gaming [4GB]
Motherboard: Gigabyte Z97 D3H
RAM: Kingston HyperX Fury 8GB @ 1866MHz

I made a Unigine Heaven benchmark today which i think scored kind of average for my components. But yet i wondered about one thing. I've got my i7 oc'd to 4.7Ghz but Heaven only shows 4Ghz for some reason (screenshot below). Also the windows system tab shows 4Ghz.

 

[jaslion]

Hey there,

First of all, i'm running the below system:

Cpu: i7 4790k @ 4.7Ghz
GPU: Gigabyte GTX 970 G1 Gaming [4GB]
Motherboard: Gigabyte Z97 D3H
RAM: Kingston HyperX Fury 8GB @ 1866MHz

I made a Unigine Heaven benchmark today which i think scored kind of average for my components. But yet i wondered about one thing. I've got my i7 oc'd to 4.7Ghz but Heaven only shows 4Ghz for some reason (screenshot below). Also the windows system tab shows 4Ghz.

.
Don't worry about it valley just reads it wrong. It always says that my i7 3630 qm is running at 1ghz while I can clearly see in cpu-z that it is running at 3.2 ghz.

 

[Itazura]

weird. But thank you for the quick answer

 

[HEXiT]

its actually reading it correctly. it reads the vendor data not the cpu clock cycles.
so if its stamped with a 3.6ghz timing and boosts upto or is oc'd to 3.9ghz it will only say 3.6ghz.