- Nov 6, 2012
- 9
- 0
- 18,510
Have a new build here, put everything together yesterday - when I first tried to turn it on, power seemed to turn on for a second, then off, then back on, etc.. MoBo light was blinking, and the fans would turn off and on. Finally seemed to pinpoint that issue to the RAM not being fully in place (not 100% if that was the cause, might have also been a fault modular cable from GFX card to PSU), but reseating the RAM and replacing that cable seemed to help. So I powered it on again - powers on fully, all lights/fans look to be working properly and are on. Then I plugged in the monitor... nothing. Monitor turns on, but nothing is displayed on the screen. I then noticed the GFX card may not be getting full power? The GFX card fans keep turning off, spinning at a decent RPM for one or two seconds, then stopping completely, then spinning for a second or two, etc..
Specs listed below. What can I troubleshoot?
Intel Core i7-5820K Haswell-E 6-Core 3.3 GHz LGA 2011-v3 140W
ASUS X99-A/USB 3.1 ATX DDR4 3300 (o.c.) Intel LGA 2011
Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz
PNY CS1311 240GB 2.5" SATA III Internal Solid State Drive (SSD)
EVGA SuperNOVA 750 G1, 80+ GOLD 750W, Fully Modular
ZOTAC GeForce GTX 970 4GB ZT-90101-10P
Cooler Master Hyper 212 EVO
Phanteks Enthoo Pro Full Tower Chassis with Window Cases
ASUS PB278Q 27" WQHD 2560x1440 PLS/ IPS
Specs listed below. What can I troubleshoot?
Intel Core i7-5820K Haswell-E 6-Core 3.3 GHz LGA 2011-v3 140W
ASUS X99-A/USB 3.1 ATX DDR4 3300 (o.c.) Intel LGA 2011
Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz
PNY CS1311 240GB 2.5" SATA III Internal Solid State Drive (SSD)
EVGA SuperNOVA 750 G1, 80+ GOLD 750W, Fully Modular
ZOTAC GeForce GTX 970 4GB ZT-90101-10P
Cooler Master Hyper 212 EVO
Phanteks Enthoo Pro Full Tower Chassis with Window Cases
ASUS PB278Q 27" WQHD 2560x1440 PLS/ IPS
Facebook
Twitter
Instagram