- Jan 12, 2025
- 6
- 6
- 15
Hello I have just bought a kingston datatraveler exodia onyx 64gb usb 3.2 because i wanted to put on it a windows boot and when i plugged it into my pc it did not show up and in DISKPART list from command prompt it showed no media for this usb device, firstly i tried to unplug it and then I realized that is quite hot, then i plugged it into my laptop and no media is shown there too. The problem is that chipgenius because I have tried this too does not get me the vendor this is what I got after letting it open for 40 mins
Description: [D:]USB Mass Storage Device(General STORAGE DEVICE)
Device Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This is a USB3.0 device working at USB2.0 mode
Current Speed: High Speed
Max Current: 96mA
USB Device ID: VID = 24A9 PID = 1802
Device Name: STORAGE DEVICE
Device Revision: 0200
Manufacturer: General
Product Model: STORAGE DEVICE
Product Revision: 0009
Chip Part-Number: Unknown
I also wonder if this can be due to my motherboard because another usb storage device that used to work when i plugged it into my pc it didn't
Description: [D:]USB Mass Storage Device(General STORAGE DEVICE)
Device Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This is a USB3.0 device working at USB2.0 mode
Current Speed: High Speed
Max Current: 96mA
USB Device ID: VID = 24A9 PID = 1802
Device Name: STORAGE DEVICE
Device Revision: 0200
Manufacturer: General
Product Model: STORAGE DEVICE
Product Revision: 0009
Chip Part-Number: Unknown
I also wonder if this can be due to my motherboard because another usb storage device that used to work when i plugged it into my pc it didn't
Facebook
Twitter
Instagram