G
Guest
Guest
Archived from groups: alt.comp.periphs.mainboard.msi-microstar (More info?)
My system has a MSI K8T Neo2 motherboard with an AMD 64, 3000+ CPU and PQI
PC3200 Turbo Dual Channel memory (2) 512K sticks. For some reason the
motherboard will not work correctly in dual channel. The memory timings are
2-2-2-5. I have tried running in dual channel by using either slots 1 & 3 or
2 & 4 as instructed by MSI. When I run in dual channel the system will run
for a while and then will either lock-up or suddenly reboot. This never
happens when I install the ram as single channel in slots 1 & 2. When I do
attempt to run in dual channel I notice on the screen during boot up the
DRAMCLOCK is listed at 400MHz. But when I run the memory in single channel
it indicates 333MHz. I have the bio set at 400 MHz. Any suggestions to get
my memory working correctly in dual channel? And why will it not run at 400
MHz in single channel? Thanks a million.
Eddie
--
remove "no-spam" for email replies
My system has a MSI K8T Neo2 motherboard with an AMD 64, 3000+ CPU and PQI
PC3200 Turbo Dual Channel memory (2) 512K sticks. For some reason the
motherboard will not work correctly in dual channel. The memory timings are
2-2-2-5. I have tried running in dual channel by using either slots 1 & 3 or
2 & 4 as instructed by MSI. When I run in dual channel the system will run
for a while and then will either lock-up or suddenly reboot. This never
happens when I install the ram as single channel in slots 1 & 2. When I do
attempt to run in dual channel I notice on the screen during boot up the
DRAMCLOCK is listed at 400MHz. But when I run the memory in single channel
it indicates 333MHz. I have the bio set at 400 MHz. Any suggestions to get
my memory working correctly in dual channel? And why will it not run at 400
MHz in single channel? Thanks a million.
Eddie
--
remove "no-spam" for email replies