Question Kingston KC3000 Temperature

[Djemed]

Hello, i bought Kingston KC3000 512GB SSD and i am wondering if my temperature is good. In HWInfo it shows drive temperature 1 and drive temperature 3, drive temperature 1 is sitting around 30-60 degrees C, while drive temperature 3 is fixed on 59 degrees, it doesn't go lower nor higher, is there a fix to this, or it's sensor is damaged or something ?

 

[Colif]

temp 1 is the memory, temp 2 is the controller which is always high.

Mine averages about 57c.

The first value usually represents the flash temperature, while the second one the controller (which is usually significantly higher).

as per Author of HWINFO - https://www.hwinfo.com/forum/thread...p-2-large-difference-and-high-temp-on-2.6501/

those temps are fine. I wish I could get 23c... guess mine is an nvme

 

[Djemed]

temp 1 is the memory, temp 2 is the controller which is always high.

Mine averages about 57c.


as per Author of HWINFO - https://www.hwinfo.com/forum/thread...p-2-large-difference-and-high-temp-on-2.6501/

those temps are fine. I wish I could get 23c... guess mine is an nvme

Okay but should it always be the same, i mean whenever i turn on my PC it is always 59, first it was 57 always, but then i ran CrystalMark test and it went to 59, will it go up or down, ever ?

 

[Colif]

i think its always around same number. It shouldn't keep going up.
HWINFO doesn't track long term, it just shows since startup so I don't know if mine has changed that much, but its always going to be higher than 1st value.

 

[Djemed]

i think its always around same number. It shouldn't keep going up.
HWINFO doesn't track long term, it just shows since startup so I don't know if mine has changed that much, but its always going to be higher than 1st value.

Okay, thanks guess i shouldn't care than that much, since operating temps is from 0-70

 

[Colif]

Controller can get to 125C safely. Memory not so much.