KT400 DUP Raid Setup

[Guest]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

I've got a KT400 with a Athlon 2500 Barton core 2 sticks 512 mem. and
2 WD 80gb hardrives setup as M/S. My bios version is K7VX4-2AA6 I've
been trying to setup a 160gb HD using the raid socket as IDE3.problem
is everytime I do I get to right before the welcome screen on XP then
it locks up. If I boot in safe mode it reads the extra drive and I can
access but not under normal boot up. Do I have the wrong BIOS or is
there a certain order that the drives have to be installed?

Any help would be deeply appreciated

Woodbutcher

 

[Dave]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

Woodbutcher <Woodbutcher@homealone.com> wrote in message news:<ch5dd0h1tv8p8j1ib9i05hjcbrorrmv4f1@4ax.com>...
> I've got a KT400 with a Athlon 2500 Barton core 2 sticks 512 mem. and
> 2 WD 80gb hardrives setup as M/S. My bios version is K7VX4-2AA6 I've
> been trying to setup a 160gb HD using the raid socket as IDE3.problem
> is everytime I do I get to right before the welcome screen on XP then
> it locks up. If I boot in safe mode it reads the extra drive and I can
> access but not under normal boot up. Do I have the wrong BIOS or is
> there a certain order that the drives have to be installed?
>
> Any help would be deeply appreciated
>
> Woodbutcher

You need: Bios version 7
The latest highpoint driver
SP1
The first two are from Soyo and the last is from Microsoft.

Dave

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

On 22 Jun 2004 19:05:10 -0700, dvnj@msn.com (dave) wrote:

>Woodbutcher <Woodbutcher@homealone.com> wrote in message news:<ch5dd0h1tv8p8j1ib9i05hjcbrorrmv4f1@4ax.com>...
>> I've got a KT400 with a Athlon 2500 Barton core 2 sticks 512 mem. and
>> 2 WD 80gb hardrives setup as M/S. My bios version is K7VX4-2AA6 I've
>> been trying to setup a 160gb HD using the raid socket as IDE3.problem
>> is everytime I do I get to right before the welcome screen on XP then
>> it locks up. If I boot in safe mode it reads the extra drive and I can
>> access but not under normal boot up. Do I have the wrong BIOS or is
>> there a certain order that the drives have to be installed?
>>
>> Any help would be deeply appreciated
>>
>> Woodbutcher
>
>You need: Bios version 7
> The latest highpoint driver
> SP1
> The first two are from Soyo and the last is from Microsoft.

And Woodbutcher needs to install the Highpoint RAID drivers the way XP
can use 'em.

-Denny-
the curmudgeonly editor
--
"A tree is a tree - how many more do you need to look at?"
Ronald Reagan (When he was Governor of California)