I want to link two wired networks that are physically apart. One as a router with a DSL modem on the WAN side. I used 2 WET54G bridges to bridge the two, and it works.....sometimes. Linksys says the two bridges, set to Ad Hoc mode to talk to each other, aren't really intended to do that, and that I should replace one of the bridges with an Access Point. They can't specifically tell me why, however, and I'm not sure what I should do. Especially since it works fine, when it does work. What happens is that the wireless link between the bridges fails, for some reason, and I do some very trivial things (scan for networks), essentially change no settings... to re-establish the link.