So i've had these hyperx fury rgb memory modules rated at 3200mhz for about 6 months now and i had the same issue when i first got them and its just that they will never work above 2400mhz and if i raise the frequency above 2400mhz , even at 2666mhz , my pc would not post and take me back to the bios screen stating that it had failed to post because of instability. i somehow got them to work at 3000mhz for a few months using 1.38 dram voltage and a timing of 16-18-18-18-36 and a trfc of 460 and a trc of 57 or 58 , and rtt_nom set to rzq/7 and rtt_park set to rzq/5 and rtt_wr set to disabled along with power down mode set to disabled, i had to do all this to get it running at that speed, jus why does this even happen anyways , but well now it doesnt even run at anything above 2400mhz even with the settings above... WHYY
pc specs-
asus prime b450mk
ryzen 5 3400g @4.2 ghz
rx vega 11 @ 1700mhz
hyperx fury rgb rated at 3200mhz but cant even run above 2400mhz
some random 1tb hdd
500w 83+ psu (zalman wattbit)
please help me if u can, im so frustrated, my bios is on the latest version too, this issue just suddenly happened like i havent even done anything , it happened after i changed my vega 11's freuqency to 1660mhz and then my pc failed to post but it posted later on with 1700mhz for the vega 11 and the ram couldnt be set to 3000 again and never to 3200mhz , i reset the bios countless times and finally i dont think the graphics relate anyway to the ram... and again, please help if u can this is just so frustrating.
pc specs-
asus prime b450mk
ryzen 5 3400g @4.2 ghz
rx vega 11 @ 1700mhz
hyperx fury rgb rated at 3200mhz but cant even run above 2400mhz
some random 1tb hdd
500w 83+ psu (zalman wattbit)
please help me if u can, im so frustrated, my bios is on the latest version too, this issue just suddenly happened like i havent even done anything , it happened after i changed my vega 11's freuqency to 1660mhz and then my pc failed to post but it posted later on with 1700mhz for the vega 11 and the ram couldnt be set to 3000 again and never to 3200mhz , i reset the bios countless times and finally i dont think the graphics relate anyway to the ram... and again, please help if u can this is just so frustrating.