Question Minor gpu sag

[DiegoGG]

Its probably a stipd question but i noticed that my two fan card has minor sag. From an angle it looks fine but from another i can notice the minor sag propably 1 or 2 mm. I have this adjustable bracket should i put it or leave it i dont want that putting the anti sag might overcorrect it and be worse than not having it since its not a big card

 

[beyondlogic]

Its probably a stipd question but i noticed that my two fan card has minor sag. From an angle it looks fine but from another i can notice the minor sag propably 1 or 2 mm. I have this adjustable bracket should i put it or leave it i dont want that putting the anti sag might overcorrect it and be worse than not having it since its not a big card

if the card came with a anti sag bracket then use it.

also what is the card?

 

[Rokinamerica]

I bought this a couple of years ago for my 2 fan to prevent qny sag, I think it was less than $10
https://www.amazon.com/gp/product/B091YBZ5VM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

[beyondlogic]

I bought this a couple of years ago for my 2 fan to prevent qny sag, I think it was less than $10
https://www.amazon.com/gp/product/B091YBZ5VM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

sorry link goes nowhere what gpu are you using?.

 

[DiegoGG]

sorry link goes nowhere what gpu are you using?.

Msi rtx 4060 the card came with no additional support

 

[beyondlogic]

Msi rtx 4060 the card came with no additional support

honestly i wouldnt worry about it

if its a 2 slot card what i would do is just adjust it a bit

lay case on its side remove screws holding it at back then adjust the card a bit till your satisfied its level be gentle then hold the card at that position and tighten down the screws. i did this on my old card that was a 2 slot and sometimes it can just be poor fist time install cause the screw holes can make the card sag down a bit but if your holding the card in place while your screwing down it wont sag as much.

 

[DiegoGG]

honestly i wouldnt worry about it

if its a 2 slot card what i would do is just adjust it a bit

lay case on its side remove screws holding it at back then adjust the card a bit till your satisfied its level be gentle then hold the card at that position and tighten down the screws. i did this on my old card that was a 2 slot and sometimes it can just be poor fist time install cause the screw holes can make the card sag down a bit but if your holding the card in place while your screwing down it wont sag as much

honestly i wouldnt worry about it

if its a 2 slot card what i would do is just adjust it a bit

lay case on its side remove screws holding it at back then adjust the card a bit till your satisfied its level be gentle then hold the card at that position and tighten down the screws. i did this on my old card that was a 2 slot and sometimes it can just be poor fist time install cause the screw holes can make the card sag down a bit but if your holding the card in place while your screwing down it wont sag as much.

Cant i Just put that thing until its straight? I aldready reseated It and It didnt change much. I mean i could also leave it without the sag its really minimal but i dont want any sag i Just want to make sure that putting that anti bracket wont cause issues in the future in a card thats not big

 

[beyondlogic]

Cant i Just put that thing until its straight? I aldready reseated It and It didnt change much. I mean i could also leave it without the sag its really minimal but i dont want any sag i Just want to make sure that putting that anti bracket wont cause issues in the future in a card thats not big

it wont as long as its not near the fans of the card or near the motherboard