Mixing RAM - same size and Mhz, different latency and volts

tedfor

Distinguished
May 23, 2007
3
0
18,510
0
I'll be honest and say I have absolutely no idea what CAS latency, timings, or voltages on my RAM mean. All I know is that the RAM I was looking to buy was different from my current RAM in all these respects. I have 2x 1gb sticks on Patriot DDR2 800 PC2 6400. Newegg says the CAS latency is 4, the timings are 4-4-4-12, and it runs at 2.2V. The RAM I want to buy is G.SKILL brand, CAS 5, timings 5-5-5-15, 1.8-2.0V. Will these two different types work without any modifications? Also, if I were to try and modify settings would the settings have to be the same for both sets, or could I change them individually?
 

Bobsama

Distinguished
Jan 10, 2007
278
0
18,780
0
IIRC, you will have to retune timings to match the CL5 set of RAM. I would recommend you look for matching RAM, however, to stop one set from messing with the other.
 

imrightbehindyou

Distinguished
May 23, 2007
17
0
18,510
0
As a general rule, you shouldn't mix RAM that way. You can... I have... But it is usually less stable to do so. And you will end up losing the performance that you could have had with the faster RAM. Now, you could re-tune the RAM settings to where you are effectively overclocking the slower RAM, but if you were gonna overclock anyway, why not overclock the good RAM, and get even better results? I say it's alright to use some mismatched RAM to get you by for a while, but it shouldn't ever be any type of long-term solution.
 

derek2006

Distinguished
May 19, 2006
751
0
18,990
1
If those are the ones you will choose though and they run at DDR2 800 already you may be able to put them up to 2.2volts to and get them to run 4-4-4-12. If those new modules run at DDR2 667 you will have to slow down your Patriots.

You can just avoid all this though and be full proof if you get one with like specs. I am mixing modules too. I have the same patriots as you and am mixing them with these. http://www.newegg.com/product/product.asp?item=N82E16820145015
Both are at DDR2 834 4-4-4-12 and 2.2volts stable.
 

Mondoman

Splendid
Jun 22, 2006
5,678
0
25,810
5
In general, there shouldn't be a problem with mixing brands/speeds of standard DDR2 RAM, just like there shouldn't be a problem using a Purolator brand oil filter on a Ford car.
However, the two RAM types you listed are unfortunately NOT standard DDR2 RAM, as each needs to be overvolted (above the DDR2 standard 1.8V) to reach its advertised speed/timings. Worse, they each require a different overvolt:
...2x 1gb sticks on Patriot DDR2 800 PC2 6400. ... it runs at 2.2V.
The RAM I want to buy is G.SKILL brand, CAS 5, timings 5-5-5-15, 1.8-2.0V. ...
All RAM installed in a machine needs to be run at the same voltage, speed, and latency settings -- they can't be set independently for each DIMM. Thus, without more information we have NO IDEA if there is a voltage where the two RAM models you mention can both run correctly.
Hopefully, both can run properly at the DDR2 standard 1.8V -- you need to contact each manufacturer and find out (a) will the specific module work at 1.8V and (b) what speed and latency settings should be used at 1.8V. These will of course be slower settings than the advertised overvolted settings.
Based on that info, you can pick a speed and latency settings that both modules will support at 1.8V. If the manufacturer won't tell you this info, they are being dishonest in selling their RAM as "DDR2" RAM.
 

tedfor

Distinguished
May 23, 2007
3
0
18,510
0
I just bought a second set of RAM that I thought was compatible with my first one. My first set was this one: Patriot eXtreme Performance 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

The second set was GeIL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

They are both PC6400, both with 4-4-4 timings, and can both operate at 2.2V, but I can't get my computer to boot. I had all the timings and voltages set to auto, but I get blue screens every time I boot. I tried again several times with new timings and voltages, but I still could not get it to boot.

The weird thing is that both sets of RAM work fine individually. When I use one or the other, they both finish several passes of memtest86 with no errors, and they boot into windows with no problems. There seems to be no problem with the RAM, and all the settings look the same, so I have no idea what the problem is. Any ideas?
 

XMSYellowbeard

Distinguished
Nov 2, 2006
933
0
19,060
30
I just bought a second set of RAM that I thought was compatible with my first one. My first set was this one: Patriot eXtreme Performance 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

The second set was GeIL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

They are both PC6400, both with 4-4-4 timings, and can both operate at 2.2V, but I can't get my computer to boot. I had all the timings and voltages set to auto, but I get blue screens every time I boot. I tried again several times with new timings and voltages, but I still could not get it to boot.

The weird thing is that both sets of RAM work fine individually. When I use one or the other, they both finish several passes of memtest86 with no errors, and they boot into windows with no problems. There seems to be no problem with the RAM, and all the settings look the same, so I have no idea what the problem is. Any ideas?
What MOBO are you using and what are your complete system specifications?

It is possible that you have gotten 2 sets of memory that will not run together in the same MOBO.
 

Mondoman

Splendid
Jun 22, 2006
5,678
0
25,810
5

tedfor

Distinguished
May 23, 2007
3
0
18,510
0
ASUS P5N-E SLI motherboard, with an Intel E6600 processor. My processor is overclocked at 3500mhz, but the memory is unlinked so I'm not sure if that has any significant effect on the memory.
 

sactogw

Distinguished
Jan 6, 2007
67
0
18,630
0
I don't mean to thread jack, but I have a similar question that I can hopefully find an answer for. I hope this may benefit you and I both. I have 2gb of Corsair XMS2pro ddr2 800 5-5-5-18 rated at 1.9v, and I just ordered XMS2pro ddr2 675 4-4-4-12 rated at 1.8v (pc-5400@675? interesting). I'm thinking that the voltages' being closer may make my set-up more stable than the one you proposed (both should run fine at 1.9v 5-5-5-18 ), but my 800 is way underclocked anyway -- 600mhz at 1:1 on a DS3+e4300 OCd to 2.7 [300x9]). When it gets here, I'll let you know what I do for stability, but it sounds like the difference in your sticks may require just a little more fine tuning. Does everyone think this sounds like a fair assumption? May I ask why you are not going for another 2 gigs of the Patriot?
 

neveremember

Distinguished
Sep 6, 2006
28
0
18,530
0
i didn't see the OS mentioned, are you running a 64bit OS? if not, then i was under the impression that anything over 2GB is nonaddressable and won't be utilized. is there something you are doing in particular that requires more than 2GB's? to me it seems silly to have more than 2GB's of Ram unless you are using some seriously RAM intensive applications.
 

jackluo923

Distinguished
Mar 12, 2007
453
0
18,780
0
I think 32bit OS can handle 3-3.5GB of physical RAM unless you're using quad SLI geforce 8800 640MB which inter will limit your ram usage to around 1 gb. LOL
 

viperx619

Distinguished
Mar 7, 2007
8
0
18,510
0
Its not to silly to get 4 GB of memory. The G.SKILL brand that he or she wants to buy only costs $81 for 2 GB. In my opinion that is a great deal. :D
 

JTaylor2005

Distinguished
Aug 2, 2008
8
0
18,520
2
I have recently put two 256mb RAMs in my computer with an existing 512mb RAM. It doesn't find the RAMs but I did a performance check and it seems to have sped up quite a lot. :pt1cable:
 
G

Guest

Guest


I also have a P5N32-E SLI mobo and it just keeps crashing my computer. I did all the possible things to keep my system stable, but this shitty motherboard just won't my memory settings. I have Kingston HyperX 6400 memory. Kept voltage on auto, didnt work. Raised to 2.0v, still didnt work. Im losing hope on this loser motherboard and im getting gigabyte Ep45-extreme. Dont waste your time on this asus mobo, just dump it and get a more stable one.
 

ASK THE COMMUNITY

TRENDING THREADS