Question Mixing RAM ?

[bobbee25]

Can I use 2 x 16GB 3200's with 2 x 16GB 3000s ?
One channel for each matched set.

 

[USAFRet]

Can I use 2 16gb 3200's with 2 16gb 3000s ?
One channel for each matched set.

The answer to this eternal question never changes.

Mixing RAM - It may work, it may fail.

 

[LordVile]

Maybe. Maybe not. If you buy a set of the exact same RAM and mix and match it might not work. Don't know until you try it. You will be limited to there slower speeds, maybe even default DDR4 speeds though because you can't run them at different speeds and timings.

 

[bobbee25]

I was hoping one chanel would be 3000, the other 3200.

If they both run at 3000, just how much effect would this have, is there really much difference running at 3000 vs 3200 on a non gaming PC. I do quite a bit of video editing ?

 

[bill001g]

More the risk you take is that it won't even run at 3000 and you have to try the base ddr4 speed of 2400. Even though it likely will run mixed memory at 2400 there are no guarantees.

The example/benchmark they use to show difference in memory speed is a application like ZIP file compression decompression. Not sure about video editing. For almost all application more total memory makes far more difference than the speed of the memory. Most people can not actually tell the difference between memory clock speeds unless they have some kind of testing tool running displaying some number on their screen.

 

[MJS WARLORD]

The golden rules for ram are as follows.

1. always use the same brand
2. never mix different Mhz because the lower one will pull down the performance of the higher one.
3. consult your mobo manual for which slots you should use in relation to how many sticks of ram you are using.

 

[JeffreyP55]

Not recommended for a few reasons.
RAM is cheap. Don't complicate things. Start fresh with matching RAM kits.

 

[bobbee25]

Here is what I have:
G.Skill Ripjaws 16gb ddr4 3200 mz

Corsair Vengeance Pro 16gb ddr4 3000mz

Vengeance LPX 16gb 3000mz (brand not shown)

Comment off subject - putting a new mb together, worst issue is putting in the m2's.

 

[USAFRet]

I was hoping one chanel would be 3000, the other 3200.

If they both run at 3000, just how much effect would this have, is there really much difference running at 3000 vs 3200 on a non gaming PC. I do quite a bit of video editing ?

It might not run at all.