Mod Project... Need help with deciding on a PSU.

[mr_lucklegs]

So, I"m modding a computer case and want to show it off. I'm missing quite a few updated parts,but that's not the problem. My old psu out a old Hp, cables are way to short to take advantage on my cable routing mod, so I need help finding one black psu with long pre sleeved cables fairly good wattage for some gaming when I update the guts!

 

[wintermint]

That depends on what you plan to use in your rigs. Tell us your build. I will only use something from Antec and Corsair. Seasonic is one of the, if not, the best but they are also expensive so I will only consider them if you're going to be using more than 1000W.

 

[mr_lucklegs]

I dont have one I'm currently using an A8n-La board and four sticks of ddr = 2gb out an old Hp. I'm modding a case and needed something basically free to show it off, but I want to show the cable routing system I have made up. Later on I will improve it.

 

[mr_lucklegs]

Check this one out! http://www.newegg.com/Product/Product.aspx?Item=N82E16817371047 Just found it!

 

[mr_lucklegs]

Any more takers on the subject?

 

[wintermint]

Antec are really reliable. I can vouch for them. I still use my Antec Earthwatts. If you don't need much power, check this PSU out instead: http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026&Tpk=Corsair%20cx430 it's from Corsair and recommended by johnnyguru [tough PSU critic]

 

[genghiskron]

heres another good option, i believe both psu's (antec hcg 520 and xfx 550) are actually made by seasonic:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817207013&Tpk=xfx%20550