Hello. I am having an issue with the desktop and monitor set-up that I have been using for years, in that it displays a No Signal Error despite both the tower and the monitor (visibly) working properly. I have recently moved and have been attempting to get my set-up to work in the new home I am renting.
After some trial-and-error, I took the set-up to a repair store. To my astonishment, it booted properly and without any errors there.
It does not work anywhere in this house- downstairs or upstairs. I have tested several different rooms. All of the other electronics in the house work fine (including the router, my laptop, and a large TV).
What's especially curious is that I am in contact with a previous and long-term resident, and he has had a working desktop setup in several different locations throughout the house.
It is also, perhaps, worth mentioning that connecting the tower to the TV via HDMI cable does not work, either.
To reiterate, the monitor turns on properly and so does the tower. Both seem to be performing their role, but the image does not go through. I have also tested this with different (new) cables and different (borrowed) monitors and outputs (DVI-D, VGA, and HDMI). The result is the same.
Does anyone have any ideas as to what might be causing the issue in question? I am somewhat at a loss at this point in time, and would greatly appreciate any assistance rendered.
After some trial-and-error, I took the set-up to a repair store. To my astonishment, it booted properly and without any errors there.
It does not work anywhere in this house- downstairs or upstairs. I have tested several different rooms. All of the other electronics in the house work fine (including the router, my laptop, and a large TV).
What's especially curious is that I am in contact with a previous and long-term resident, and he has had a working desktop setup in several different locations throughout the house.
It is also, perhaps, worth mentioning that connecting the tower to the TV via HDMI cable does not work, either.
To reiterate, the monitor turns on properly and so does the tower. Both seem to be performing their role, but the image does not go through. I have also tested this with different (new) cables and different (borrowed) monitors and outputs (DVI-D, VGA, and HDMI). The result is the same.
Does anyone have any ideas as to what might be causing the issue in question? I am somewhat at a loss at this point in time, and would greatly appreciate any assistance rendered.