Hey there everyone. This is fourth system Ive built using only M.2 NVMe SSDs. But this time Im having issues with the M.2 NVME's even getting detected. Its probably some underlying technical issue that is a user error (me!)
New Build. For a buddies mom.
Turns on.
Goes to bios or tries to install windows if boot flash is plugged in.
When its time to select a hard drive it doesn't show on either the Windows Install list (its just blank) or in the bios setting.
Gigabyte Z590 UD AC (rev1.x) https://www.gigabyte.com/Motherboard/Z590-UD-AC-rev-1x#kf
Bios Version F3
Crucial P2 500GB 3D NAND NVMe PCIe M.2 SSD - CT500P2SSD8
and also tried a
Kingston 480GB A400 M.2 Internal SSD - SA400M8
Ive tried both the first and third M.2 NVME slots. And no luck.
Running 32gigs Viper mem. 1660 super VGA. evga 650 pwr.
I really hope this is not a bios issue, as I have no experience flashing mobo bios.
I can still do a return on the motherboard.
Any ideas and help are appreciated. Thank you for your time.
New Build. For a buddies mom.
Turns on.
Goes to bios or tries to install windows if boot flash is plugged in.
When its time to select a hard drive it doesn't show on either the Windows Install list (its just blank) or in the bios setting.
Gigabyte Z590 UD AC (rev1.x) https://www.gigabyte.com/Motherboard/Z590-UD-AC-rev-1x#kf
Bios Version F3
Crucial P2 500GB 3D NAND NVMe PCIe M.2 SSD - CT500P2SSD8
and also tried a
Kingston 480GB A400 M.2 Internal SSD - SA400M8
Ive tried both the first and third M.2 NVME slots. And no luck.
Running 32gigs Viper mem. 1660 super VGA. evga 650 pwr.
I really hope this is not a bios issue, as I have no experience flashing mobo bios.
I can still do a return on the motherboard.
Any ideas and help are appreciated. Thank you for your time.