So I could really use some help here. First time PC builder. The VGA EZ debug light comes on when I power on the computer and no display shows up. After a lot of troubleshooting I thought it was a DOA board, so I got a replacement. Same issue so now I'm really confused.
Build
CPU: Ryzen 5 5600
Motherboard: MSI B550 A Pro
RAM: Silicon Power GAMING 16 GB (2x8gb) DDR4-3200 CL 16
SSD: Western Digital Black SN770 500 GB M.2-2280 PCIe 4.0 X4
GPU: Gigabyte Geforce GTX 1660 6 GB
Case: Cooler Master Masterbox MB511 ARGB ATX Mid Tower Case
PSU: Thermaltake Toughpower GF1 PE 750 W 80+ Gold Certified Fully Modular ATX
Things I've Tried...
Flash Bios to 7C56vA9
Clear CMOS
Boot with 1 RAM stick
Tried GPU in another computer and it works fine
Replaced the motherboard
After all the different things I've done I can figure it out. Please, anyone have any ideas what it could be?
Build
CPU: Ryzen 5 5600
Motherboard: MSI B550 A Pro
RAM: Silicon Power GAMING 16 GB (2x8gb) DDR4-3200 CL 16
SSD: Western Digital Black SN770 500 GB M.2-2280 PCIe 4.0 X4
GPU: Gigabyte Geforce GTX 1660 6 GB
Case: Cooler Master Masterbox MB511 ARGB ATX Mid Tower Case
PSU: Thermaltake Toughpower GF1 PE 750 W 80+ Gold Certified Fully Modular ATX
Things I've Tried...
Flash Bios to 7C56vA9
Clear CMOS
Boot with 1 RAM stick
Tried GPU in another computer and it works fine
Replaced the motherboard
After all the different things I've done I can figure it out. Please, anyone have any ideas what it could be?