MX4GVR - P4 2.8Ghz Northwood - unable to modify clock rati..

[Jim]

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

I have an MX4GVR board
BIOS 1.14
Intel Northwood P4 2.8 Ghz chip
The clock ratio is set in the BIOS at 14
It seems like I cannot change it so the chip is running at only 1.8 Ghz

Anyone out there have any ideas, suggestions, solutions ?

Many Thanks

steve

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

"jim" <tarzan@hotmail.com> wrote:

>I have an MX4GVR board
>BIOS 1.14
>Intel Northwood P4 2.8 Ghz chip
>The clock ratio is set in the BIOS at 14
>It seems like I cannot change it so the chip is running at only 1.8 Ghz
>
>Anyone out there have any ideas, suggestions, solutions ?
>
>Many Thanks
>
>steve

Have you checked the bus speed frequency? It seems yours is set to 133
MHz, which would get approx. 1.8 GHz. It should be set to 200 MHz
(x14=2800 MHz, or 2.8 GHz.)

Jim

remove* *for email