My GTX 980 Ti G1 Gaming from Gigabyte OCed results.

[PatrikVujicic]

Hello!

Can you please guys tell me if this is a good OC or not?
http://i.imgur.com/N9tCgZj.png
I can't get it any higher on core even with adding voltages.I've seen someone Oced the same card 160+ on core and 990+on memory.But I cannot have the same OC even with max voltages :/ So is it still a good oc or not?

 

[nikoli707]

every chip is different. just because some other guy or a review got +whatever on the core doesn't mean you will.

ditch that gigabyte easy tune program and use msi afterburner. otherwise as long as your gpu core temps and vrm temps are fine then add more voltage. your not going to hurt anything on the stock bios. max out the voltage slider and see how far you can go. let unigen valley/heaven run in a loop for 20min to check temps. stay under the whatever the temp priority is set to at stock... make a slightly more aggressive fan curve until you find the noise acceptable. also i wouldn't mess with the memory overclock much. it wont really amount to any more than 1-2fps in games but it creates more heat(thought it will raise your unigine scores). save the extra heat output for your core stability. and turn down the 130% power target/slider, it should only be high enough to stop you from throttling, maybe 3% higher than whatever point the card is throttling.

 

[Ahmedivx]

I say these are good results, I just got the same card and I can't get it stable and go through both valley and heaven with more than +110mhz on the core and +500mhz on the mem (that's +1000mhz in OC Guru as I use Aferburner) without adding any extra core voltage resulting in max boost core clock of 1477mhz and max mem clock of 8000mhz, so I guess your +130 result are considered well above average if not pretty good, +160mhz is just insane I say it's the maximum anyone can get (this is so close to the results JayzTwoCents the OC guru could achieve with this card I believe he reached the 1529mhz boost clock wall), so be happy about your card it's a good sample

One question though if I may, what is the ASCI reading you get from GPU-Z, mine is 73.6%