Hi there, this is my first post here!
Back in August I've built my own desktop PC, which always worked without problems. Last night it was still functioning, but this morning it turns out that it won't boot. It tries to boot, but the screen stays black and the speaker starts beeping hard: I managed to count 25 short beeps, without any pause. After the long sequence of beeps, it powers off, then on and it happens to repeat the beep pattern that I've just described. So it loops in this situation, without actually booting. I've looked around for this specific beep code, but I didn't find anything useful.
These are the specs of my PC:
MOTHERBOARD: Gigabyte GA-H87-D3H
CPU: Intel Core I5-4670
RAM: Corsair Vengeance Low Profile DDR3 2x4 GB
VGA: Gigabyte Radeon HD 7790 2 GB
SSD (containing the OS): Samsung 840 Ultraslim Pro
HDD: Western Digital Caviar Blue
PSU: Enermax Triathlor 550W
I've tried to remove the VGA, but the problem is not gone.
Has someone got any clue on what's happening?
Back in August I've built my own desktop PC, which always worked without problems. Last night it was still functioning, but this morning it turns out that it won't boot. It tries to boot, but the screen stays black and the speaker starts beeping hard: I managed to count 25 short beeps, without any pause. After the long sequence of beeps, it powers off, then on and it happens to repeat the beep pattern that I've just described. So it loops in this situation, without actually booting. I've looked around for this specific beep code, but I didn't find anything useful.
These are the specs of my PC:
MOTHERBOARD: Gigabyte GA-H87-D3H
CPU: Intel Core I5-4670
RAM: Corsair Vengeance Low Profile DDR3 2x4 GB
VGA: Gigabyte Radeon HD 7790 2 GB
SSD (containing the OS): Samsung 840 Ultraslim Pro
HDD: Western Digital Caviar Blue
PSU: Enermax Triathlor 550W
I've tried to remove the VGA, but the problem is not gone.
Has someone got any clue on what's happening?