My PC don't turn on, please help

[Talesseed]

Hello,
Today my PC cannot turn on. I just finished my GPU watercooling (Kraken G10 + X40) yesterday. It did work, but I couldn't start the G10 fan. I connected all the wires like i was told. I turned my pc on yesterday, and and I installed the Kraken drivers.
Today I just tried to fix te problem, and I deconnected some wires and reconnected them.
One wire is connected to the AUXFAN_3, one to USB (on the motherboard), one to the nxzt fan and one to the Kraken G10 fan.
My pc didn't started.

Thanks in advance

 

[Scott Leess]

is the water pump running? and after it was installed did u monitor the temps for a short while ?
i had this problem i brought a h80i and the pump died and it cost me my cpu but luckily the pc place i brought mine form replaced both cooler and cpu

also have you disturbed any other wiers ( power switch) power supply fuse?

and when u power it up what does the system do when u apply power to the bother bored

 

[Talesseed]

is the water pump running? and after it was installed did u monitor the temps for a short while ?
i had this problem i brought a h80i and the pump died and it cost me my cpu but luckily the pc place i brought mine form replaced both cooler and cpu

also have you disturbed any other wiers ( power switch) power supply fuse?

and when u power it up what does the system do when u apply power to the bother bored

Hello. Thanks for help.
Yeah, both the x40 fan and the waterpomp are running. I dod monitored the temps in valley and they didn't changed. I don't think I have disturbed any wires. And what is a bother bored ? Sorry I'm not english :/

 

[Scott Leess]

my bad typing lol
what happens when u press the power button ?

 

[Talesseed]

my bad typing lol
what happens when u press the power button ?

Oh I see xD
Nothing happends sadly
The mobo display isn't working too

 

[Talesseed]

Double post sorry

 

[Scott Leess]

id say ur psu is dead orr ur power switch is broke try the fuse in you power supply plug ( or the power lead)
recheck all the connections and check ur power switch i have broke mine and had to re solder mine