Question My PC Instantly Restarts To Post When Trying to Enable PBO

[Martin2188]

CPU: Ryzen 9 5950x
Motherboard: Asus TUF B550m Plus Wifi
GPU: RTX 4090 Zotac Extreme Amp Airo
RAM: Kingston Fury Special Edition (64 GB)
SSD: 2x 4TB Kingston Renegade
PSU: ROG Strix 1000w
AIO: NZXT X53

So i’ve been trying to gets my temps down (50 idle - 90 full load) using the PBO Negative Curve Optimizer method. But when I enable PBO I am constantly rebooting to POST immediately on lock screen or whilst I’m booting. I’ve tried disabling PBO and disabling DOCP but I’m still rebooting. I only fixed the issue when I “clear” my CMOS by taking out the battery. How do I enable PBO then? Is my BIOS bugged? Is my motherboard not enough? TIA
Note: Tried using Ryzen Master Curve Optimizer Mode. It gave me -28 on All Cores.

 

[white.a.drew]

CPU: Ryzen 9 5950x
Motherboard: Asus TUF B550m Plus Wifi
GPU: RTX 4090 Zotac Extreme Amp Airo
RAM: Kingston Fury Special Edition (64 GB)
SSD: 2x 4TB Kingston Renegade
PSU: ROG Strix 1000w
AIO: NZXT X53

So i’ve been trying to gets my temps down (50 idle - 90 full load) using the PBO Negative Curve Optimizer method. But when I enable PBO I am constantly rebooting to POST immediately on lock screen or whilst I’m booting. I’ve tried disabling PBO and disabling DOCP but I’m still rebooting. I only fixed the issue when I “clear” my CMOS by taking out the battery. How do I enable PBO then? Is my BIOS bugged? Is my motherboard not enough? TIA
Note: Tried using Ryzen Master Curve Optimizer Mode. It gave me -28 on All Cores.

If you just want temps to deplete a little bit turn off turbo stepping much simpler then messing with all that none since

 

[Martin2188]

If you just want temps to deplete a little bit turn off turbo stepping much simpler then messing with all that none since

Can you give a walkthrough?

 

[white.a.drew]

Can you give a walkthrough?

View: https://m.youtube.com/watch?v=h8ZsWJa4NN4

Skip to 2:30 to just get into it

 

[Martin2188]

View: https://m.youtube.com/watch?v=h8ZsWJa4NN4

Skip to 2:30 to just get into it

Will try now.

 

[Martin2188]

View: https://m.youtube.com/watch?v=h8ZsWJa4NN4

Skip to 2:30 to just get into it

This option does not exist in my BIOS. I've already updated to the latest version VER 3002. Moreover, my bios does not have Power Management Control. I even used the search function to find "Turbo Mode" and "Power Management Control" but to no avail.

 

[white.a.drew]

This option does not exist in my BIOS. I've already updated to the latest version VER 3002. Moreover, my bios does not have Power Management Control. I even used the search function to find "Turbo Mode" and "Power Management Control" but to no avail.

View: https://m.youtube.com/watch?v=McLV7lN1LXw

It should

 

[Martin2188]

It should

I'm sorry but the PC keeps restarting when I tinker something in the bios, It might be a Motherboard problem. I've only enabled DOCP for now. Thank you for your time.