My PC won't boot after installing M.2 SSD

[quanganh.vta]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

 

[Noobiness_Unlimited]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

 

[quanganh.vta]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

Yes I did, not only the monitors got no signal but the mouse and keyboard didn't either

 

[Noobiness_Unlimited]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

Yes I did, not only the monitors got no signal but the mouse and keyboard didn't either

might be a dust or wire issue, what do you think?

 

[quanganh.vta]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

Yes I did, not only the monitors got no signal but the mouse and keyboard didn't either

might be a dust or wire issue, what do you think?

I'm not sure cuz all I did was just install the m.2 drive and it gone like that. I spent 3 hours digging through the forums and tried multiples ways but nothing seem to work.

 

[Noobiness_Unlimited]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

Yes I did, not only the monitors got no signal but the mouse and keyboard didn't either

might be a dust or wire issue, what do you think?

I'm not sure cuz all I did was just install the m.2 drive and it gone like that. I spent 3 hours digging through the forums and tried multiples ways but nothing seem to work.

your pc worked properly before you installed the ssd?

 

[quanganh.vta]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

Yes I did, not only the monitors got no signal but the mouse and keyboard didn't either

might be a dust or wire issue, what do you think?

I'm not sure cuz all I did was just install the m.2 drive and it gone like that. I spent 3 hours digging through the forums and tried multiples ways but nothing seem to work.

your pc worked properly before you installed the ssd?

Yes, everything was fine!
I was planning to install the m.2 drive then migrate windows onto it

 

[Noobiness_Unlimited]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

Yes I did, not only the monitors got no signal but the mouse and keyboard didn't either

might be a dust or wire issue, what do you think?

I'm not sure cuz all I did was just install the m.2 drive and it gone like that. I spent 3 hours digging through the forums and tried multiples ways but nothing seem to work.

your pc worked properly before you installed the ssd?

Yes, everything was fine!
I was planning to install the m.2 drive then migrate windows onto it

during installation of the drive you may have hit a wire or something and it got loose, you can try reseating the ssd

 

[quanganh.vta]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

Yes I did, not only the monitors got no signal but the mouse and keyboard didn't either

might be a dust or wire issue, what do you think?

I'm not sure cuz all I did was just install the m.2 drive and it gone like that. I spent 3 hours digging through the forums and tried multiples ways but nothing seem to work.

your pc worked properly before you installed the ssd?

Yes, everything was fine!
I was planning to install the m.2 drive then migrate windows onto it

during installation of the drive you may have hit a wire or something and it got loose, you can try reseating the ssd

I double checked everything. gpu, ssd, hdd, etc... everything was fine 🙁

 

[Noobiness_Unlimited]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

Yes I did, not only the monitors got no signal but the mouse and keyboard didn't either

might be a dust or wire issue, what do you think?

I'm not sure cuz all I did was just install the m.2 drive and it gone like that. I spent 3 hours digging through the forums and tried multiples ways but nothing seem to work.

your pc worked properly before you installed the ssd?

Yes, everything was fine!
I was planning to install the m.2 drive then migrate windows onto it

during installation of the drive you may have hit a wire or something and it got loose, you can try reseating the ssd

I double checked everything. gpu, ssd, hdd, etc... everything was fine 🙁

I really have to do a bit of research on it, i will try to get back on you tomorrow if possible and untill then..dont try to do anything else it might worsen the problem... you never know

 

[quanganh.vta]

Hi guys,
I've just bought a new m.2 ssd to speed up my system, which was a samsung 970 evo. Unfortunately after installing the m.2 drive on to the motherboard, my system won't boot at all, not even to splash screen. All the fans and pumps are running but there is no signal to monitors, keyboard and mouse don't light up.
I tried reset the mobo by unplug the power cord and remove the batery, switching the sata ports around, nothing seem to work.

Asus prime B350 plus
Ryzen 5 1600
2x8gb 3000mhz corsair vengance
Gtx1070ti
2 HDD and the original boot drive is a samsung 120gb ssd
650W PSU with 80 plus gold

The mobo maunual says that the m.2 port shares bandwith with the sata5/6 and I got nothung plugged in to those. I am really panic now and dont know what I did wrong or what is the problem. Please help!
I did tryto boot without the m.2 but it didnt

checked the graphics(VGA) Cable?

Yes I did, not only the monitors got no signal but the mouse and keyboard didn't either

might be a dust or wire issue, what do you think?

I'm not sure cuz all I did was just install the m.2 drive and it gone like that. I spent 3 hours digging through the forums and tried multiples ways but nothing seem to work.

your pc worked properly before you installed the ssd?

Yes, everything was fine!
I was planning to install the m.2 drive then migrate windows onto it

during installation of the drive you may have hit a wire or something and it got loose, you can try reseating the ssd

I double checked everything. gpu, ssd, hdd, etc... everything was fine 🙁

I really have to do a bit of research on it, i will try to get back on you tomorrow if possible and untill then..dont try to do anything else it might worsen the problem... you never know

Thank you for your time and concern! I'm very appreciated!

 

[quanganh.vta]

I've just noticed that the HDD light on the case wasn't flashing. maybe my mobo was dead or something 🙁

 

[1LiquidPC]

What all has been tried? Even with M.2 drive removed, still no boot? Any Q-Code readout on board?

 

[Noobiness_Unlimited]

I've just noticed that the HDD light on the case wasn't flashing. maybe my mobo was dead or something 🙁

if you have a different pc then you can check the ssd there, if it dosent work there, maybe you are right

 

[omegadoom13]

wait... do you still have the original boot drive? Does it still work?

 

[quanganh.vta]

I've just noticed that the HDD light on the case wasn't flashing. maybe my mobo was dead or something 🙁

if you have a different pc then you can check the ssd there, if it dosent work there, maybe you are right

I took my system to the shop this morning and they were also confused. They also assumed the mobo was dead and took it out to test. It booted up, they put the system back together and it booted like normal. everything is up and running now and we don't know what happened.

 

[Noobiness_Unlimited]

I've just noticed that the HDD light on the case wasn't flashing. maybe my mobo was dead or something 🙁

if you have a different pc then you can check the ssd there, if it dosent work there, maybe you are right

I took my system to the shop this morning and they were also confused. They also assumed the mobo was dead and took it out to test. It booted up, they put the system back together and it booted like normal. everything is up and running now and we don't know what happened.

hmmmmmmm, did they tested it on, like different power or vga cable or something?

 

[failboat]

modular PSU? Those can have wires move and do that.

 

[quanganh.vta]

I've just noticed that the HDD light on the case wasn't flashing. maybe my mobo was dead or something 🙁

if you have a different pc then you can check the ssd there, if it dosent work there, maybe you are right

I took my system to the shop this morning and they were also confused. They also assumed the mobo was dead and took it out to test. It booted up, they put the system back together and it booted like normal. everything is up and running now and we don't know what happened.

hmmmmmmm, did they tested it on, like different power or vga cable or something?

No, they just took the mobo out, tried to boot it up with the cpu and 1 ram stick and it worked. then they add the vga, it worked. so they put everything back together and it worked normally as it should. and no one can explained what was the problem. a guy there said that my pc was haunted lol

 

[Noobiness_Unlimited]

I've just noticed that the HDD light on the case wasn't flashing. maybe my mobo was dead or something 🙁

if you have a different pc then you can check the ssd there, if it dosent work there, maybe you are right

I took my system to the shop this morning and they were also confused. They also assumed the mobo was dead and took it out to test. It booted up, they put the system back together and it booted like normal. everything is up and running now and we don't know what happened.

hmmmmmmm, did they tested it on, like different power or vga cable or something?

No, they just took the mobo out, tried to boot it up with the cpu and 1 ram stick and it worked. then they add the vga, it worked. so they put everything back together and it worked normally as it should. and no one can explained what was the problem. a guy there said that my pc was haunted lol

ok, so u solved your problem and now it works correctly?