Question my ryzen 5 2600 crashes at 3.8 ghz after a couple hours of gameplay

[quintenw204]

my ryzen 5 2600 crashes at 3.8 ghz after a couple hours of gameplay it runs at regular voltage 1.13750
can i get like a warrenty or something since the retailer advertised a boostclock of 3.9 ghz

 

[PC Tailor]

Depends on what exactly is causing the crash.
The 2600 can boost up to 3.9, but it will only do this is the conditions are right, and on certain cores.
Have you monitored CPU core temps etc?

 

[Calvin7]

Are you asking how to return the ryzen 5 2600?

Frequency	3400 MHz
Maximum turbo frequency	3900 MHz

 

[quintenw204]

Depends on what exactly is causing the crash.
The 2600 can boost up to 3.9, but it will only do this is the conditions are right, and on certain cores.
Have you monitored CPU core temps etc?

how do i monitor these and also it crashes in cinebench at 3.8 with stok voltage and i do not think temps go oop to high that fast

 

[quintenw204]

Are you asking how to return the ryzen 5 2600?

Frequency	3400 MHz
Maximum turbo frequency	3900 MHz

not really i am asking what might be the problem and a possible fix

 

[mdd1963]

If you see it occasionally going to 3.9 GHz, the CPU is working as advertised....; no one claimed it would hold 3.9 GHz under a heavy/all-cores loaded style of load such as encountered in rendering or even gaming....

Perhaps your core voltage is not quite high enough (even .01-.02 V increase can make a difference), or, your RAM speeds/voltages/timings might be causing crashes...

 

[rmayfield1957]

Are you using the stock cooler and paste. I had an issue with the stock cooler. Switched my 2600 to an other cooler. Temps were way to high on stock cooler.

 

[quintenw204]

If you see it occasionally going to 3.9 GHz, the CPU is working as advertised....; no one claimed it would hold 3.9 GHz under a heavy/all-cores loaded style of load such as encountered in rendering or even gaming....

Perhaps your core voltage is not quite high enough (even .01-.02 V increase can make a difference), or, your RAM speeds/voltages/timings might be causing crashes...

do you know what would be the right ram timings and speed

 

[quintenw204]

Are you using the stock cooler and paste. I had an issue with the stock cooler. Switched my 2600 to an other cooler. Temps were way to high on stock cooler.

yes im using stock but if i do a cinebench at 3.9ghz it crashes almost immediately i do not think the temps rise that fast

 

[CountMike]

yes im using stock but if i do a cinebench at 3.9ghz it crashes almost immediately i do not think the temps rise that fast

Back to basics, What MB and RAM do you have ? There's no way it would do 3.9GHz with voltage set manually at 1.13750, it would need to go up to over 1.3v and higher.

 

[quintenw204]

Back to basics, What MB and RAM do you have ? There's no way it would do 3.9GHz with voltage set manually at 1.13750, it would need to go up to over 1.3v and higher.

i have the
G.Skill Aegis DDR4 16GB
3000 mhz ram

 

[xravenxdota]

3.9ghz boost on 1-2 cores.With my AIO i get a max all core boost of 3.75

 

[quintenw204]

3.9ghz boost on 1-2 cores.With my AIO i get a max all core boost of 3.75

3.9ghz boost on 1-2 cores.With my AIO i get a max all core boost of 3.75

what does that mean? do you get a max of 3.75 ghz