I just bought an
e7200
msi p45 8-d
4 gig 667mhz ram
320 sata
500 liberty atx psu
all other parts and componets as well.
I basically upgraded my computer took all the old parts out of the case and just put in the new mobo/cpu and put in the old ram, dvd hard drive etc.
I think I put everything in properly however I don't know why my computer has no display or why my mouse is not turning on (mx518) usb no light under it. And the keyboard doesn't even have light on the num lock, caps lock, etc.
At first the fans, cpu, gpu, would all spin plus leds on 10 seconds then stop and turn off 3 seconds, turn back on for 10 seconds. No display mouse keyboard. THen I decided to try and push the pins on my cpu fan/heatsink harder. WHen I booted agian, it stayed on however when i reset it does the same thing but when i Hit the power button it stays on. Now though, it's good it's on and everything but I have no signal on my monitor, my keyboard is not on or working, my mouse is not working there is no beep.
I'm sad I spent so much time putting this together (4 hours) with carefully reading and using an anti static wrist strap. I spent so much money, and was planning on overclocking but never got the chance since my computer work properly.
Can anyone help are these symptoms familiar? I don't know what's the problem I would appreciate it if anyone could help.
If more detail is needed I would be glad to give some more info.
Sorry if this is in the wrong subcategory but I went under home built systems.
e7200
msi p45 8-d
4 gig 667mhz ram
320 sata
500 liberty atx psu
all other parts and componets as well.
I basically upgraded my computer took all the old parts out of the case and just put in the new mobo/cpu and put in the old ram, dvd hard drive etc.
I think I put everything in properly however I don't know why my computer has no display or why my mouse is not turning on (mx518) usb no light under it. And the keyboard doesn't even have light on the num lock, caps lock, etc.
At first the fans, cpu, gpu, would all spin plus leds on 10 seconds then stop and turn off 3 seconds, turn back on for 10 seconds. No display mouse keyboard. THen I decided to try and push the pins on my cpu fan/heatsink harder. WHen I booted agian, it stayed on however when i reset it does the same thing but when i Hit the power button it stays on. Now though, it's good it's on and everything but I have no signal on my monitor, my keyboard is not on or working, my mouse is not working there is no beep.
I'm sad I spent so much time putting this together (4 hours) with carefully reading and using an anti static wrist strap. I spent so much money, and was planning on overclocking but never got the chance since my computer work properly.
Can anyone help are these symptoms familiar? I don't know what's the problem I would appreciate it if anyone could help.
If more detail is needed I would be glad to give some more info.
Sorry if this is in the wrong subcategory but I went under home built systems.