Need help changing my cpu fan speed with SpeedFan

BeanMedley

Reputable
Feb 24, 2014
23
0
4,510
So I recently built my first computer, and everything seems to be working fine. I have an asus m5a78l-m lx plus micro atx motherboard, an amd FX6300 cpu, two 4gb sticks of hyperx blue memory, a Corsair CX430 power supply and an amd radeon hd 7750 graphics card. I am using the heatsink that came with the FX6300 and it is really loud. It goes up to 5000+rpm while in pretty much any game, and I the cpu doesn't even heat up much. I've been trying to change the fan speeds using speed fan but I don't think I'm doing it right. Here is a picture of my settings.

AvEM8ZP.png


Can someone tell me if this is right, or if there's more I need to do? I'm gonna buy a new fan as soon as I can, but until then I know it'll drive me insane if I don't do something about it.
 
Solution
chek all box not only the cpu then click on the + sing and activate the pwm for all i lower mine to 35 ad max at 50 then under fan check them all an log do the same for speed minimum 0 and max 100 add the auto on and all apply after repost all the picture that give .
chek all box not only the cpu then click on the + sing and activate the pwm for all i lower mine to 35 ad max at 50 then under fan check them all an log do the same for speed minimum 0 and max 100 add the auto on and all apply after repost all the picture that give .
 
Solution
been looking at the result 1 your hdo run at 48 c and the hd 2 at 39 c and the hd 3 37 c the hdo running hot should like the others cpu and mobo are in the specs gpu at 52 c idle so check is temp when it is under load i also seen that you only have one case fan with the cpu fan in that why you cpu fan run at full speed and noisy you dont have enough air flow to take fresh air in and hot air out .give the name and model of your case you may need to had some fans ,did you put in all the settings i was suggesting in speed fan .