[SOLVED] Need help choosing a case for my new build

[eli150]

Hey guys,

I recently decided to go with these specs for my new build:

cpu: Ryzen 3900x

cooler: Noctua NH D15

ram: Corsair Vengence LPX 2x16gb 3600

mobo: X570 Aorus Master

psu: Corsair HX750i

gpu: GTX 1070 ti (already have it and not looking to replace it right now).

The case i ordered is the Corsair 500D.
Is this case good enough for my new PC? should i return it and get something else?
Do you think it will run too hot or too loud?

*If you are wandring why i'm asking all these questions now is because i didn't thought about them.. I just saw the brand name, the nice look and ordered the case

 

[Lutfij]

You're good with the case you've ordered. What else are you looking for, in your chassis? In hindsight, you should ask before you pull the trigger.

 

[jojesa]

The Corsair 500D is a very good case. If you like it keep it.

People will have different taste, I would have gone for something like Lian Li Lancool 2.
But that does not mean is a better case.

 

[eli150]

You're good with the case you've ordered. What else are you looking for, in your chassis? In hindsight, you should ask before you pull the trigger.

The Corsair 500D is a very good case. If you like it keep it.

People will have different taste, I would have gone for something like Lian Li Lancool 2.
But that does not mean is a better case.

Thanks guys i was really worried about getting everything to fit inside the case. It arrived and i managed to get everything inside.. The cpu cooler was a bit of a challenge but i hope i'm done with it. I'm guessing I can connect every cable in the case to my motherboard but it's kind of difficult to find the usb type c connection... any advice ?

 

[jojesa]

...but it's kind of difficult to find the usb type c connection... any advice ?

The internal USB Type-C USB header is next to the fourth RAM slot (counting from CPU) , near the edge of the motherboard...near the motherboard diagnostic LED (CPU, VGA, BOOT DRAM).

 

[eli150]

The internal USB Type-C USB header is next to the fourth RAM slot (counting from CPU) , near the edge of the motherboard...near the motherboard diagnostic LED (CPU, VGA, BOOT DRAM).

Dude thank you!!! i'll check as soon as i get home

EDIT: Thank you again i just connected everything and it works. I saw that beautiful bios screen. Now the only problem is that i cant really use my new build. The plug doesn't fit my multi socket so i had to connect it directly to my wall and then connected to the monitor to a socket on a different wall (on the other side of my room) just so i can see if everything was ok with my first build.. But i'm guessing that is a problem for some other sub-forum 😅