I have a push button type of power button. Over the years, I think the wiring inside the switch has become lose.
Over time, it takes more and more pressure to get it to switch on. Eventually, it stops altogether.
If I open the case and push the two wires on the button up "into" the glued part, put everything back, and try again, it works perfectly. For a couple of months at least. But slowly the problem reoccurs.
As you can imagine, I'm tired of having to remove the power button every couple of months, push the wires in, and try again. I want to fix this problem once and for all, but have no idea where to start.
I'd appreciate any advice or links on how to solve this loose wiring issue of my power button.
Images for reference:
View: https://imgur.com/gallery/y4QQONp
(If this is the wrong forum, please guide me to the correct one. I didn't know which place was best.)
Over time, it takes more and more pressure to get it to switch on. Eventually, it stops altogether.
If I open the case and push the two wires on the button up "into" the glued part, put everything back, and try again, it works perfectly. For a couple of months at least. But slowly the problem reoccurs.
As you can imagine, I'm tired of having to remove the power button every couple of months, push the wires in, and try again. I want to fix this problem once and for all, but have no idea where to start.
I'd appreciate any advice or links on how to solve this loose wiring issue of my power button.
Images for reference:
View: https://imgur.com/gallery/y4QQONp
(If this is the wrong forum, please guide me to the correct one. I didn't know which place was best.)