Need help for a Pentium 1 motherboard

[Guest]

Archived from groups: comp.sys.ibm.pc.misc,alt.comp.periphs.mainboard (More info?)

Hi

I have a QDI VX III Pentium 1 motherboard , 166 mhz.

Since, that in the setup I can ennable a USB port, there should be some
pin on the motherboard to connect my USB plug adaptor (there's 8 wire on
that adaptor; vcc 0 , vcc 1 , d1+ , gnd , d1- , gnd , d0+ , d0- ). Where's
those pins are on the motherboard and which wires goes on which pins ?

Thank, and here's the motherboard spec;

Motherboard

Pentium 1

CPU Intel Pentium MMX, 166 MHz

Motherboard QDI VX III (3 ISA, 4 PCI, 4 SIMM, 1 DIMM)

Chipset Intel Triton 82430VX

BIOS Award Modular (07/07/97)

Motherboard id 07/07/97-i430VX-NS306-2A59GQ1EC-00

Chipset Intel Triton 82430VX


BIOS Award Modular BIOS v4.51PG

BIOS message P5I430VX/250DM Explorer II BIOS V3.5S 07/09/97


chipset North Bridge Intel 82437VX



--

 

[Guest]

Archived from groups: comp.sys.ibm.pc.misc,alt.comp.periphs.mainboard (More info?)

On Mon, 11 Apr 2005 09:38:03 +0000, Gaetan Mailloux wrote:

> I have a QDI VX III Pentium 1 motherboard , 166 mhz.
>
> Since, that in the setup I can ennable a USB port, there should be some
> pin on the motherboard to connect my USB plug adaptor (there's 8 wire on
> that adaptor; vcc 0 , vcc 1 , d1+ , gnd , d1- , gnd , d0+ , d0- ). Where's
> those pins are on the motherboard and which wires goes on which pins ?
>
It should be in the manual, or maybe also silkscreened on the MB. And then
again, maybe it's not implimented on the MB. Look for a 4 or 8 (dual
port) pin connector.

http://www.qdigrp.com/qdisite/eng/products/vx3.htm

This may give you a clue.

http://www.qdigrp.com/qdisite/eng/support/f_vx.htm

note USB pin config.

--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
My server http://wesnewell.no-ip.com/cpu.php
Verizon server http://mysite.verizon.net/res0exft/cpu.htm