Question Need Help, GPU Gigabyte RTX 3060ti no longer works after shutdown.

[Franz317]

Need Help, Gigabyte RTX 3060ti no longer works after shutdown but works again after not using it for a few days it's as if it's a complete cycle, the rgb logo on the GPU isn't lighting up when trying to turn it on when it fails hope that gives any clues.

They say it might be PSU problem but 1050ti doesn't seem to have any problem. Hopefully my GPU isn't damaged as well it's been only over a year since I got it and it no longer has a store warranty.

Specs:
CPU: i3 10105
Mobo: Asus H410m-v3
Ram: 16gb hyperx kingston
PSU: Coolermaster G800
1x 1TB ssd
1x 1TB HDD
And some 12v 4 rgb fans

 

[ohio_buckeye]

Could be psu related. The 1050ti is a low power card and doesn’t draw near what the 3060ti does. The only way to know would be try it a different psu that is new or known working and good quality.

 

[Franz317]

Could be psu related. The 1050ti is a low power card and doesn’t draw near what the 3060ti does. The only way to know would be try it a different psu that is new or known working and good quality.

I only got a 700w unrated generic PSU can try using that for the 3060ti just for a day or two?

 

[ohio_buckeye]

You could try it to see if it will power on but I wouldn’t run it long term by any means. I’ve accidentally fried components by using cheap knock off power supplies. But you could try it I suppose Ty see if the card can power on then shut it off. If it works at least you’ll know what the issue is.