[Need Help] Not able to install Windows 10 or other in My New Ryzen 5 1600 rig

[ashish1999]

I am trying to install Windows 10 using USB pendrive on my new rig , but during installation , when it is installing , PC gets crashed during installing (bluescrren ) and this heppens again and again , please help

I have already tried different os and usb pedrives ,tried different softwares to make it bootable .

My rig
2x8 GB corsir 2400 Mhz DDr4 ram
Ryzen 5 1600 CPU
Msi b350m bazooka motherboard
Corsair vs 650 W PSU
Asus Strix GTX 1070 Oc GPU


Please help me , I'm not able to use my built

 

[elbert]

RAM tends to be one of the highest sources of issue with Ryzen. If you tried to set the RAM clock I would suggest to reset back to default. Your RAM may only work at say 2133 or even lower.

 

[Wolfshadw]

I'd also try installing with only one RAM module and removing the graphics card until the install is complete.

-Wolf sends

 

[Raju_29]

Ryzen has no iGPU so without the Gfx card it won't boot. Try to change settings to optimised default . If you have the motherboard CD remove it and try to install windows. Check whether you have created USB drive properly GPT partition for windows 10 since I had the same issue. As the guy above try removing the RAM and install a single stick to check whether it works. Don't overclock for now since Ryzen is not that stable with memory overclock