G
Guest
Guest
Archived from groups: comp.sys.hp.hpux,comp.sys.hp.hardware (More info?)
I am having a heck of a time trying to discern what is wrong with one of my
K100s
When attempting to install HP-UX, the system boots, but eventually displays
the following on the console:
***
Booting...
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
ISL Revision A.00.43 Apr12, 2000
ISL booting hpux (;0):INSTALL
Boot
: disk(8/12/5.2.0.0.0.0.0;0):INSTALL
9707284 + 1122304 + 691712 start 0x14d568
FLT CBFB
******* Unexpected HPMC. Processor HPA 0xfffa0000 *******
GENERAL REGISTERS:
r00/07 00000000 0010C800 00452F94 02A46800 00000089 00000000 00000000
02971280
r08/15 00000001 00000002 00000003 0FD1BE2C 0014D568 FFFFFFFF 00000801
000331D0
r16/23 00000001 00030720 00000008 FFB40838 00000008 00000001 00081003
FFB40800
r24/31 00000000 00000045 FFB40845 00A73268 00000000 00000038 7FFF0CB0
00081003
CONTROL REGISTERS:
sr0/7 00000000 00000000 00000000 00000000 00000000 0000224D 00002247
00000000
pcq 00000000.0010CF84 00000000.0010CF88 isr = 00000000 ior = 00452F94
pid1/4 0000 0000 0000 0000 ipsw = 0004000F iva = 00029800 sar = 0F ccr = C0
tr0/7 00982AA8 00035800 FFFFFFF0 00000000 01830930 15F168E5 0009BB68
7FFF0BB8
rctr = 00000000 itmr = 160B5F84 eiem = FFFFFFF0 eirr = 80000008 iir =
E840C002
cr1/7 00000000 00000000 00000000 00000000 00000000 00000000 00000000
MACHINE CHECK PARAMETERS:
Check Type = 20000000 CPU STATE = 9E000004 Cache Check = 00000000
TLB Check = 00000000 Bus Check = 0020000C PIM State = ? SIU Status =
????????
Detected by 00000000 Assists = 00000000 Processor = 00000000
Assist ID = 00000000 Slave Addr = FFFA0000 Master Addr = 00000000
trap type 1 (HPMC), pcsq.pcoq = 0.10cf84, isr.ior = 0.452f94
@(#) $Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c
'Vw
for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108'
Wed N
ov 8 19:05:38 PST 2000 $High-priority machine check: (display==0xd910,
flags==0
x0)
* CPU State 0x9e000004
* Detected By 0x0
* Bus Check 0x20000c
* Slave Address 0xfffa0000
WARN E000
*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.
ERROR: Your system crashed before I/O and dump configuration was complete.
A crash dump cannot be taken under these circumstances without
special configuration. Contact your HP support representative.
*****
Can anyone make heads or tails of this?
Thank you all very much, your help is greatly appreciated.
I am having a heck of a time trying to discern what is wrong with one of my
K100s
When attempting to install HP-UX, the system boots, but eventually displays
the following on the console:
***
Booting...
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
ISL Revision A.00.43 Apr12, 2000
ISL booting hpux (;0):INSTALL
Boot
: disk(8/12/5.2.0.0.0.0.0;0):INSTALL
9707284 + 1122304 + 691712 start 0x14d568
FLT CBFB
******* Unexpected HPMC. Processor HPA 0xfffa0000 *******
GENERAL REGISTERS:
r00/07 00000000 0010C800 00452F94 02A46800 00000089 00000000 00000000
02971280
r08/15 00000001 00000002 00000003 0FD1BE2C 0014D568 FFFFFFFF 00000801
000331D0
r16/23 00000001 00030720 00000008 FFB40838 00000008 00000001 00081003
FFB40800
r24/31 00000000 00000045 FFB40845 00A73268 00000000 00000038 7FFF0CB0
00081003
CONTROL REGISTERS:
sr0/7 00000000 00000000 00000000 00000000 00000000 0000224D 00002247
00000000
pcq 00000000.0010CF84 00000000.0010CF88 isr = 00000000 ior = 00452F94
pid1/4 0000 0000 0000 0000 ipsw = 0004000F iva = 00029800 sar = 0F ccr = C0
tr0/7 00982AA8 00035800 FFFFFFF0 00000000 01830930 15F168E5 0009BB68
7FFF0BB8
rctr = 00000000 itmr = 160B5F84 eiem = FFFFFFF0 eirr = 80000008 iir =
E840C002
cr1/7 00000000 00000000 00000000 00000000 00000000 00000000 00000000
MACHINE CHECK PARAMETERS:
Check Type = 20000000 CPU STATE = 9E000004 Cache Check = 00000000
TLB Check = 00000000 Bus Check = 0020000C PIM State = ? SIU Status =
????????
Detected by 00000000 Assists = 00000000 Processor = 00000000
Assist ID = 00000000 Slave Addr = FFFA0000 Master Addr = 00000000
trap type 1 (HPMC), pcsq.pcoq = 0.10cf84, isr.ior = 0.452f94
@(#) $Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c
'Vw
for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108'
Wed N
ov 8 19:05:38 PST 2000 $High-priority machine check: (display==0xd910,
flags==0
x0)
* CPU State 0x9e000004
* Detected By 0x0
* Bus Check 0x20000c
* Slave Address 0xfffa0000
WARN E000
*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.
ERROR: Your system crashed before I/O and dump configuration was complete.
A crash dump cannot be taken under these circumstances without
special configuration. Contact your HP support representative.
*****
Can anyone make heads or tails of this?
Thank you all very much, your help is greatly appreciated.