Hello.
I've recently bought new case and moved to it, but I have stumbled up on some issues.
#1 Issue
I am using 4 (Cooler Master MasterFan MF120) fans - 1 in the back and 3 on top. I connected everything as seen in scheme. Fans themselves work (spin), but Fan 4 (Marked on scheme) doesn't work with RGB controller. It doesn't appear on Razer synapse software and it only lights like halfway through (a bit of red and green-ish color) on one side of it.
EDIT: Bottom shown fans (Case fans) are connected to what I could call sys fan2.
View: https://i.imgur.com/gkiF9sW.png
I tried to swap that fan between other Cooler master fans, but in every situation that one doesn't work.Note: I have 2 spare Cooler master fans and they also don't light up and doesn't get detected in Razer software. They worked right in my previous case but one of them still didn't light up as needed. (Swaped them around to ensure it's not broken itself).
PS. My CPU cooler is AeroCool Mirage 5.
#2 Issue
My new case (Phanteks Eclipse P500A DRGB) comes with 3 front fans and light strip in case. Currently they are not connected to razer controller since marked wire which should go into motherboard (or in my case to RGB controller) comes with male connector, but razer controller requires female connector. How can I connect them to system instead of just changing their colors with case button?
---
If anyone have suggestions how to connect ALL the things to one RGB solution, please share with it.
I am using Gigabyte B450 Aorus Elite motherboard, also have RGB Ram sticks and Gigabyte 3060ti Elite which comes with RGB. To this day I have used RGB Fusion (Gigabyte's software) to control them, but I would wish to connect all the RGBs together in one software.
I've recently bought new case and moved to it, but I have stumbled up on some issues.
#1 Issue
I am using 4 (Cooler Master MasterFan MF120) fans - 1 in the back and 3 on top. I connected everything as seen in scheme. Fans themselves work (spin), but Fan 4 (Marked on scheme) doesn't work with RGB controller. It doesn't appear on Razer synapse software and it only lights like halfway through (a bit of red and green-ish color) on one side of it.
EDIT: Bottom shown fans (Case fans) are connected to what I could call sys fan2.
View: https://i.imgur.com/gkiF9sW.png
I tried to swap that fan between other Cooler master fans, but in every situation that one doesn't work.Note: I have 2 spare Cooler master fans and they also don't light up and doesn't get detected in Razer software. They worked right in my previous case but one of them still didn't light up as needed. (Swaped them around to ensure it's not broken itself).
PS. My CPU cooler is AeroCool Mirage 5.
#2 Issue
My new case (Phanteks Eclipse P500A DRGB) comes with 3 front fans and light strip in case. Currently they are not connected to razer controller since marked wire which should go into motherboard (or in my case to RGB controller) comes with male connector, but razer controller requires female connector. How can I connect them to system instead of just changing their colors with case button?
---
If anyone have suggestions how to connect ALL the things to one RGB solution, please share with it.
I am using Gigabyte B450 Aorus Elite motherboard, also have RGB Ram sticks and Gigabyte 3060ti Elite which comes with RGB. To this day I have used RGB Fusion (Gigabyte's software) to control them, but I would wish to connect all the RGBs together in one software.