I just finished putting my first build together. I’m very excited to get moving on the software side, but I ran into a problem. I plugged the power in, then hit the power button and the fans twitched, then everything shut down. Sometimes it will power cycle again a few seconds later. So far I’ve tried a few things but I’m stuck now.
I have removed GPU, CPU cooler and fans.
I’ve removed and reinstalled ram and CPU.
I’ve done the PSU paper clip test and the PSU fan spins fine.
I’ve reseated each cable,
Now, with no fans, as soon as I hit the power button on the case, the red CPU light comes on then fades away. Any other ideas?
Hardware:
CPU i5-12600k
GPU MSI GeForce 2080
Mobo MSI Mag Tomahawk Z690 DDR4 Wi-Fi
Ram gskill 3200 2x16
SSD 500gb 980evo nvme m.2
CPU cooler ak620
PSU PowerSpec PSX 750GSM
Case Musetex
I have removed GPU, CPU cooler and fans.
I’ve removed and reinstalled ram and CPU.
I’ve done the PSU paper clip test and the PSU fan spins fine.
I’ve reseated each cable,
Now, with no fans, as soon as I hit the power button on the case, the red CPU light comes on then fades away. Any other ideas?
Hardware:
CPU i5-12600k
GPU MSI GeForce 2080
Mobo MSI Mag Tomahawk Z690 DDR4 Wi-Fi
Ram gskill 3200 2x16
SSD 500gb 980evo nvme m.2
CPU cooler ak620
PSU PowerSpec PSX 750GSM
Case Musetex