New Computer Build ... No video output

[Guest]

Put together new computer, switched on, no video output on monitor.

Have run through the checklist in this link http://www.tomshardware.co.uk/forum/261145-31-perform-steps-posting-post-boot-video-problems, still nothing.

Pretty sure there should be no compatibility issues as I'm replicating a built from scan.co.uk.

Component List:
Intel® Pentium® Processor G4560
(3M Cache, 3.50 GHz) (Stock fan)
ASUS H110M-A m.2 motherboard
Crucial 8GB DDR4 - 2133MHZ 1.2V CL15 Ram
Kingston SSDnow uv400 240GB ssd
500W PSU
Samsung monitor connected via HDMI (have also checked VGA connection)

Reasonably certain I can rule out PSU issues as I tested with an old PSU that I know works with no change.

Any help would be appreciated. Thanks.

 

[alexoiu]

Can you post a picture of the board?
Does the CPU fan spin when starting the board?

 

[Guest]

Can you post a picture of the board?
Does the CPU fan spin when starting the board?

CPU fan does spin, no system beeps from motherboard speaker

 

[alexoiu]

If removing the RAM and starting the board, are you getting any beeps?

 

[Guest]

If removing the RAM and starting the board, are you getting any beeps?

Yes, one long followed by țwo short.

 

[alexoiu]

Then board and cpu do work. Have you tested the other RAM slot too?

 

[Guest]

Then board and cpu do work. Have you tested the other RAM slot too?

Tested with the ram in either slot, same result.

 

[alexoiu]

As it looks like a memory issue, I see 2 options: removing the cpu and checking the socket if any bent pin and testing different ram.

 

[alexoiu]

Make also sure that the monitor does work.
I'd test it firstly.

 

[Guest]

As it looks like a memory issue, I see 2 options: removing the cpu and checking the socket if any bent pin and testing different ram.

I've already checked for bent pins so I guess I'll have to get some more ram to test (which I suspected I might have to do). Thanks.

 

[Guest]

Make also sure that the monitor does work.
I'd test it firstly.

I'm currently using it with my old pc so I know it works.

 

[alexoiu]

As it looks like a memory issue, I see 2 options: removing the cpu and checking the socket if any bent pin and testing different ram.

I've already checked for bent pins so I guess I'll have to get some more ram to test (which I suspected I might have to do). Thanks.

You're welcome.