Hi
I can not get my system to detect new GPU. The fans run, but nothing in Display adapters (other than on board Intel)
EVGA GeForce GTX 1650 SUPER SC
https://www.newegg.com/evga-geforce-gtx-1650-super-04g-p4-1357-kr/p/N82E16814487482
System Specs
MB
BIOSTAR TH67+ LGA 1155
https://www.newegg.com/p/N82E16813138296?Item=N82E16813138296
Memory
CORSAIR XMS3 8GB DDR3 SDRAM DDR3 1333 (PC3 10600)
https://www.newegg.com/corsair-8gb-240-pin-ddr3-sdram/p/N82E16820145315?Item=N82E16820145315
PSU
Antec EarthWatts Green EA-430D Green 430W
https://www.newegg.com/antec-earthw...-power/p/N82E16817371034?Item=N82E16817371034
CPU
Intel Core i5-2500K
This is a new card that we are trying to put in this older system for the reason in this post , https://forums.tomshardware.com/thr...ter-build-recommendations-for-my-kid.3640786/
The Windows 10 is all updated (no optional driver updates etc.), and is on new Samsung Evo (used Samsung Migration). BIOS is most recent. Intel Drive and Support Assistant does not have any updates.
I even ran device manager as admn. and I only see Intel HD Graphics 3000 (on board). Nothing under view hidden devices.
The GPU fans run, but it is not detected. I even tried it both the slots.
I also tried Nvidia Geforce 84000GS in both the slots. Nothing is detected.
Both Geforce 1650 and 8400GS work in other desktop.
I even tried with a different psu, SeaSonic M12II 620 Bronze 620W. Still can’t get both GPS to detect.
I have cleared CMOS via jumpers and taking CMOS battery out.
I have only 1 ssd connected and nothing else so, 430 watts PSU should be enough or even 620 watts psu.
Only once 8400GS was seen under the device manager. But now nothing!
Maybe I am doing something wrong in the BIOS. Here are some of BIOS settings
BIOs UEFI Boot: Enabled
PCI Rom Priority: Legacy ROM
PCI Express No Snoop: Enabled
PCI Express ASTM Support: Auto
North Bridge
Initiate Graphic Adapter: PEG/PCI
Render Stand By: Disabled
PCI Express Port: Enabled
PEX16_1 – Gen X: Auto.
The disk is MBR. Do I need to convert it to gpt (It fails at mbr2gpt /convert /allowfullos…Disk Layout validation failed for disk 0)?
I have blown air into ports, everything, made sure the GPU cards are fully seated.
Need help
Thanks
I can not get my system to detect new GPU. The fans run, but nothing in Display adapters (other than on board Intel)
EVGA GeForce GTX 1650 SUPER SC
https://www.newegg.com/evga-geforce-gtx-1650-super-04g-p4-1357-kr/p/N82E16814487482
System Specs
MB
BIOSTAR TH67+ LGA 1155
https://www.newegg.com/p/N82E16813138296?Item=N82E16813138296
Memory
CORSAIR XMS3 8GB DDR3 SDRAM DDR3 1333 (PC3 10600)
https://www.newegg.com/corsair-8gb-240-pin-ddr3-sdram/p/N82E16820145315?Item=N82E16820145315
PSU
Antec EarthWatts Green EA-430D Green 430W
https://www.newegg.com/antec-earthw...-power/p/N82E16817371034?Item=N82E16817371034
CPU
Intel Core i5-2500K
This is a new card that we are trying to put in this older system for the reason in this post , https://forums.tomshardware.com/thr...ter-build-recommendations-for-my-kid.3640786/
The Windows 10 is all updated (no optional driver updates etc.), and is on new Samsung Evo (used Samsung Migration). BIOS is most recent. Intel Drive and Support Assistant does not have any updates.
I even ran device manager as admn. and I only see Intel HD Graphics 3000 (on board). Nothing under view hidden devices.
The GPU fans run, but it is not detected. I even tried it both the slots.
I also tried Nvidia Geforce 84000GS in both the slots. Nothing is detected.
Both Geforce 1650 and 8400GS work in other desktop.
I even tried with a different psu, SeaSonic M12II 620 Bronze 620W. Still can’t get both GPS to detect.
I have cleared CMOS via jumpers and taking CMOS battery out.
I have only 1 ssd connected and nothing else so, 430 watts PSU should be enough or even 620 watts psu.
Only once 8400GS was seen under the device manager. But now nothing!
Maybe I am doing something wrong in the BIOS. Here are some of BIOS settings
BIOs UEFI Boot: Enabled
PCI Rom Priority: Legacy ROM
PCI Express No Snoop: Enabled
PCI Express ASTM Support: Auto
North Bridge
Initiate Graphic Adapter: PEG/PCI
Render Stand By: Disabled
PCI Express Port: Enabled
PEX16_1 – Gen X: Auto.
The disk is MBR. Do I need to convert it to gpt (It fails at mbr2gpt /convert /allowfullos…Disk Layout validation failed for disk 0)?
I have blown air into ports, everything, made sure the GPU cards are fully seated.
Need help
Thanks