New FSB Speed

[Si]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

I just installed a new cpu and memory into my 8KNXP Rev 2.0 board which both
run at the correct FSB for this board which is 800MHz. My previous cpu and
memory both ran at 533MHz. Will my PC automatically adjust to this new FSB
or is there something I need to adjust in the BIOS?

Cheers.

Si


--
I'd rather have a bottle in front of me then a frontal lobotomy.

 

[Glitch]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Si wrote:
> I just installed a new cpu and memory into my 8KNXP Rev 2.0 board which both
> run at the correct FSB for this board which is 800MHz. My previous cpu and
> memory both ran at 533MHz. Will my PC automatically adjust to this new FSB
> or is there something I need to adjust in the BIOS?
>

The mobo will auto adjust to the FSB and you can check that when you
boot the PC,you should see the speed of your CPU. It should state
something like this(these are my CPU specs):
CPU P4 2800MHz (200x14)-where 200 isFSB speed and 14 is the CPU multiplier.

 

[Si]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Thanks mate.

Si


--
I'd rather have a bottle in front of me then a frontal lobotomy.
"Glitch" <Glitch_120@yahoo.com> wrote in message
news:cu335o$6ga$1@bagan.srce.hr...
> Si wrote:
>> I just installed a new cpu and memory into my 8KNXP Rev 2.0 board which
>> both run at the correct FSB for this board which is 800MHz. My previous
>> cpu and memory both ran at 533MHz. Will my PC automatically adjust to
>> this new FSB or is there something I need to adjust in the BIOS?
>>
>
> The mobo will auto adjust to the FSB and you can check that when you boot
> the PC,you should see the speed of your CPU. It should state something
> like this(these are my CPU specs):
> CPU P4 2800MHz (200x14)-where 200 isFSB speed and 14 is the CPU
> multiplier.
>