Hello. Please bare with me here as I am now desperate and borderline ready to return everything and get a laptop.
Here is what I am running
CPU -i913900k (Swapped once)
MOBO -MSI Z790 EDGE WiFi DDR5 (swapped once)
RAM DDR5 -Corsair Vengeance 32GB
SSD -Samsung 990 2 TB Gen 4
PSU -850W Corsair (just got to test prior psu)
GPU -AMD Radeon 7700xt
Bios was updated to latest version.
The pc will stay in bios indefinitely and will never cut off randomly. If I can get into windows 11, and open up (GTA 5M) then it’ll stay on. If I turn on the pc like normal, it’ll usually boot cycle several times.
As I try to idle or do homework, the pc then turns off like as if I unplugged the PC then will boot cycle.
I caught this error once
“Memory Overclock Fail!
Previous overclock settings failed, system boot with default setting and placed previous settings in BIOS menu Press F1 to run setup.
Press F2 to load default values and continue.
Press ALT#L to load Last known good configuration values and continue”
I also see in even viewer the critical error is event 41. Which is when the system is rebooted without cleanly shutting down.
Prior to event ID 41 there are the kernal processor power event 55 errors taking place.
Here is what I am running
CPU -i913900k (Swapped once)
MOBO -MSI Z790 EDGE WiFi DDR5 (swapped once)
RAM DDR5 -Corsair Vengeance 32GB
SSD -Samsung 990 2 TB Gen 4
PSU -850W Corsair (just got to test prior psu)
GPU -AMD Radeon 7700xt
Bios was updated to latest version.
The pc will stay in bios indefinitely and will never cut off randomly. If I can get into windows 11, and open up (GTA 5M) then it’ll stay on. If I turn on the pc like normal, it’ll usually boot cycle several times.
As I try to idle or do homework, the pc then turns off like as if I unplugged the PC then will boot cycle.
I caught this error once
“Memory Overclock Fail!
Previous overclock settings failed, system boot with default setting and placed previous settings in BIOS menu Press F1 to run setup.
Press F2 to load default values and continue.
Press ALT#L to load Last known good configuration values and continue”
I also see in even viewer the critical error is event 41. Which is when the system is rebooted without cleanly shutting down.
Prior to event ID 41 there are the kernal processor power event 55 errors taking place.
Last edited: