Hi. I have an old PC that I have updated bit by bit. The specifications before the new GPU/PSU:
Motherboard: Asus TUF gaming B560-plus Wifi
CPU: Intel Core I9-11900KF
Ram: Corsair Vengeance lpx DDR4 3000mhz 64Gb
GPU: Asus GeForce GTX 1070 ROG Strix Gaming
Psu: Corsair CX750M
Then I bought a new GPU and PSU as below:
GPU: GeForce RTX 4070 Super 12G Ventus 2x OC
PSU: Corsair RM1000X
After I switched to these components and all the cabling, I started the PC as usual. Apart from that there is no signal from the gpu. Then i tryed to switch back to the old Gpu, to check if I had a bad graphics card. Still no image signal either on hdmi or dp. Then switched back to old psu and gpu, still same problem. No image signal from gpu.
Tried afterwards to remove the gpu to test the image signal directly from the mainboard, and once again zero signal.
Now i have the motherboard on a piece of cardboard with only the PSU and one stick of RAM, still no output signal from the from the motherboard's HDMI port..
Has anyone been lost in this before? Have checked around a bit but no one with this motherboard. See those with newer motherboards get a bios flashback/update. But can't find a solution for this outside of Windows.
Would be very happy for help with this
Motherboard: Asus TUF gaming B560-plus Wifi
CPU: Intel Core I9-11900KF
Ram: Corsair Vengeance lpx DDR4 3000mhz 64Gb
GPU: Asus GeForce GTX 1070 ROG Strix Gaming
Psu: Corsair CX750M
Then I bought a new GPU and PSU as below:
GPU: GeForce RTX 4070 Super 12G Ventus 2x OC
PSU: Corsair RM1000X
After I switched to these components and all the cabling, I started the PC as usual. Apart from that there is no signal from the gpu. Then i tryed to switch back to the old Gpu, to check if I had a bad graphics card. Still no image signal either on hdmi or dp. Then switched back to old psu and gpu, still same problem. No image signal from gpu.
Tried afterwards to remove the gpu to test the image signal directly from the mainboard, and once again zero signal.
Now i have the motherboard on a piece of cardboard with only the PSU and one stick of RAM, still no output signal from the from the motherboard's HDMI port..
Has anyone been lost in this before? Have checked around a bit but no one with this motherboard. See those with newer motherboards get a bios flashback/update. But can't find a solution for this outside of Windows.
Would be very happy for help with this