I just recently built a new pc. When I was getting the computer to post I used an HDMI cable and everything worked fine. I went to plug in my DP cables because I’ve got 144hz monitors and I get no signal, but using hdmi works just fine. I know the GPU works because I’ve put it in my other computer and it works just fine. I’ve tried DDU and clearing out any drivers because I did use this GPU in my other computer before I built my new one. Once I was done with DDU I reinstalled drivers and it didn’t fix it. I’ve reseated the card and used the other PCIE slot and that doesn’t fix it either. I have a 2070 super but unfortunately it only has one HDMI port on it so I can’t see if that’d work. Is there something else I can try or is it possibly a motherboard issue? Also, when going in to display settings windows recognizes the other monitor. In the Multiple displays section it has a drop down arrow with “Disconnect this display” and when I change that to “Extend desktop to this display” I get a warning stating, “The display settings could not be saved. Please try a different combination of display settings”
My specs are: Ryzen 5600X, RTX 2070 Super, 16gb of 3600mhz ram, Asus b550-f gaming mobo. Currently I’m using Windows 10 and have monitor one plugged in via HDMI. Since my gpu doesn’t have another hdmi port I can’t plug my other monitor in with hdmi.
My specs are: Ryzen 5600X, RTX 2070 Super, 16gb of 3600mhz ram, Asus b550-f gaming mobo. Currently I’m using Windows 10 and have monitor one plugged in via HDMI. Since my gpu doesn’t have another hdmi port I can’t plug my other monitor in with hdmi.
Last edited: