no video signal after upgrading PC (tried many solutions)

[Blazgolob]

I just got 2 days ago new parts for my computer
Intel I7-6800k
MSI x99a krait edition
g.skill Trident z 16GB ddr4 16GTZB kit (2x8GB)

And the problem is when I boot PC I Will just get black screen and no video signal. I tried with many solutions which I found here on Toms Hardware but nothing worked. I reseted the bios, i tried with single memory slots, I disonnected Pc from power for several minutes. I holded power button for 30 seconds but still Im gettign no video signal. All the parts are new. My other components are;

PSU-corsair cs550
Gigabyte GTX 670 windforce
SSD Samsung evo 850 250GB
HDD Western Digital green 1TB

 

[RC325]

I just got 2 days ago new parts for my computer
Intel I7-6800k
MSI x99a krait edition
g.skill Trident z 16GB ddr4 16GTZB kit (2x8GB)

And the problem is when I boot PC I Will just get black screen and no video signal. I tried with many solutions which I found here on Toms Hardware but nothing worked. I reseted the bios, i tried with single memory slots, I disonnected Pc from power for several minutes. I holded power button for 30 seconds but still Im gettign no video signal. All the parts are new. My other components are;

PSU-corsair cs550
Gigabyte GTX 670 windforce
SSD Samsung evo 850 250GB
HDD Western Digital green 1TB

What beepcode do you get?

 

[johnmanth]

Well, my brother had the EXACT same symptoms but i highly doubt that this is the problem. My brother's problem was the mob (which was msi btw) the capacitors got screwed but since your's is a new one the only way this could happen was due to a power surge. Check the capacitors to be sure though, if they have a green liquid on them(not neceserally all of them, maybe just one is faulty) then they are screwed

 

[TemZyCinema]

[code]

[/code]

I just got 2 days ago new parts for my computer
Intel I7-6800k
MSI x99a krait edition
g.skill Trident z 16GB ddr4 16GTZB kit (2x8GB)

And the problem is when I boot PC I Will just get black screen and no video signal. I tried with many solutions which I found here on Toms Hardware but nothing worked. I reseted the bios, i tried with single memory slots, I disonnected Pc from power for several minutes. I holded power button for 30 seconds but still Im gettign no video signal. All the parts are new. My other components are;

PSU-corsair cs550
Gigabyte GTX 670 windforce
SSD Samsung evo 850 250GB
HDD Western Digital green 1TB

What beepcode do you get?

I wont get any beep code...I tried to put speaker inside but there is no imput for speker on motheboard

 

[Paul NZ]

What CPU was in it before? The new one need BIOS N6 to work. Did you replace the CPU ??

 

[Blazgolob]

What CPU was in it before? The new one need BIOS N6 to work. Did you replace the CPU ??

I had i5 2500k but i replaced with i7 6800k and motherboard msi x99a krait edition

 

[Paul NZ]

It's not the SLI Krait is it?? Because that doesnt support the 2500k. Its not listed

 

[TemZyCinema]

What CPU was in it before? The new one need BIOS N6 to work. Did you replace the CPU ??

It's not the SLI Krait is it?? Because that doesnt support the 2500k. Its not listed

omg...Did you even read what i wrote? I have msi x99a krait edition and I7 6800k..the old processor has nothing to to with my problem

 

[Paul NZ]

I know that I CAN NOT find the mobo if its not the SLI Krait. I'm asking because the BIOS that was on it for the 2500k. May not be on it now to support the new CPU

If the right BIOS isnt on it now to support the 6800k it wont do anything until you update the BIOS whatever its is. So it'll work