Question Noctua NH-D15 offset mounting feature ?

[Kalik212]

I plan on building a new system with the 7800X3D and ASUS TUF Gaming X670E-Plus WiFi motherboard...I plan to use the Noctua DH-15 air cooler (not the new G2 version but the older model)...I want to be able to use the offset mounting feature where it shifts it slightly down off-center to better cool the CCD

but my concern is would that effect the M.2 slot or main GPU slot?...I want to use the Samsung 990 Pro with included heatsink along with the ASUS TUF Gaming 4080 Super...anyone use the DH-15 offset with this board and an NVMe with heatsink in the 1st M.2 slot and a beefy Nvidia GPU in the main GPU slot?...any issues with clearance?...I attached a pic of the Asus motherboard so you can get a better picture of the layout...

 

[Phaaze88]

NH-D15S. Better cooler overall. The original is inferior, save for cooling potential, and that's not by a lot.

The M.2 slot above the primary x16 has just been a poor implementation; next to no access to fresh air, and the gpu just heats it up.

 

[Kalik212]

but as far as the offset mounting, will there be any issues as far as clearance either with the M.2 drive or GPU?

 

[Phaaze88]

but as far as the offset mounting, will there be any issues as far as clearance either with the M.2 drive or GPU?

You won't be able to access the M.2 slot without removing the cooler, which may or may not be a big deal to you, and you'll have to live with small gaps of wiggle room in the millimeters.

 

[COLGeek]

Forget offsetting, that really isn't an option for that cooler as @Phaaze88 points out.

Assuming you have decent airflow with the rest of your system, you should be okay.

 

[geofelt]

The NH-D15s is naturally offset to clear pcie slots that may be located too close to the cpu.
It also has higher ram clearance vs. the 32,, for the NH-D15
Look at the specs diagram for each on the noctua site.