Not enough standoffs w/ case. Which/how do I get more?

[SebastianZHD]

This motherboard:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130679&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-_-na-_-na-_-na&cm_sp=&AID=10446076&PID=3938566&SID=
was purchased with this case:
http://www.amazon.com/dp/B007BDJ5SM/?tag=pcpapi-20
and the case doesn't come with enough standoffs for each of the screws and holes in the ATX motherboard. Could I get these to make up for the missing ones?
http://www.amazon.com/StarTech-Brass-Motherboard-Standoffs-Computer/dp/B00213KL5I
Are there different types of standoffs I that I need to differentiate, or can I just get any?
Thanks.

 

[RealBeast]

I would contact Thermaltake support and have them send you a free bag of them -- they should have included more than enough. They are all the same size but some use different screw thread size.

 

[g-unit1111]

IMO - five is all you need. Four in the corners and one in the middle, that should be more than enough to properly secure your motherboard. That's all I ever use.

 

[SebastianZHD]

The person that has the case (I'm just trying to help her out) says she sees now that there's raised parts where there isn't any standoffs. Is this a thing? Can you have raised spots on the case where you don't need to put standoffs?
Here's a picture of what it looks like, and you can sort of see where the raised parts are.
http://ecx.images-amazon.com/images/I/81rQaORE4FL._SL1500_.jpg
I'm thinking what I just described is the case, but I just wanted a second opinion to make sure we don't accidentally fry the motherboard.
Thanks.

 

[RealBeast]

The person that has the case (I'm just trying to help her out) says she sees now that there's raised parts where there isn't any standoffs. Is this a thing? Can you have raised spots on the case where you don't need to put standoffs?
Here's a picture of what it looks like, and you can sort of see where the raised parts are.
http://ecx.images-amazon.com/images/I/81rQaORE4FL._SL1500_.jpg
I'm thinking what I just described is the case, but I just wanted a second opinion to make sure we don't accidentally fry the motherboard.
Thanks.

Sure, lots of cases have build in standoffs in the motherboard tray and then a couple extra loose ones to add if desired. I tend to support my boards with all possible points to minimize flexing since I swap stuff out often.