hello I am kind of confused on what I should do regarding my cooler, currently I am using the stock cooler, mainly due to the other cooler I have (cooler master hyper 212) giving strange temperature readings. when running stock cooler my temperatures seem normal (around 25-31°C idle and 45°C at full load) however when I installed the cooler master my temperature readings are way below what I would consider normal, like single digit degree, ive seen it as low as 2°C but on average it reads around 9°C on idle and no more than 25° under full load. these strange readings prompted me to uninstall the cooler master and reinstall the stock cooler. I even tried reinstalling cooler master awhile later when I seen stock temperatures seem normal enough, with similar results. each time I clean old paste and reapply new, I do like the cooler master cooler much better than the stock but my worry is why are these readings so far off with the cooler master cooler? clearly my CPU is not running at 2-6°C but I would say the sensors seem fine when stock cooler readings seem much more reasonable. has anyone else experienced this? my worry would be over heating the CPU if the temperature readings are in fact so far off with the cooler master. or is the cooler master cooler that much better these readings (around 9°C idle with balanced power mode) seem normal ?
system is
windows 10 home 64bit
amd fx6300
GA-78LMT-S2
8Gb DDR3 ram
AMD Radeon R7 250 2Gb
system is
windows 10 home 64bit
amd fx6300
GA-78LMT-S2
8Gb DDR3 ram
AMD Radeon R7 250 2Gb