If i boot from a usb drive, the system (linux) can see all hds (ssd+hd) perfectly, but then even if i install a new system from usb, bios doesn't see any boot devices, as well as SSD (which contains all OSs).
This started to happen after i've fixed cooler. If the HDs wouldn't be accessible even after booting from a USB, i'd assume the connection somewhere was damaged. But they work fine if i boot from a usb drive.
Moreover, in boot devices i've got an option which i never had before: Realtex PXE (network adapter, i assume).
Plus, in IDE mode BIOS sees both HD and SSD, but non of them as a Boot device; in AHCI it sees only HD.
This started to happen after i've fixed cooler. If the HDs wouldn't be accessible even after booting from a USB, i'd assume the connection somewhere was damaged. But they work fine if i boot from a usb drive.
Moreover, in boot devices i've got an option which i never had before: Realtex PXE (network adapter, i assume).
Plus, in IDE mode BIOS sees both HD and SSD, but non of them as a Boot device; in AHCI it sees only HD.
Last edited by a moderator:
Facebook
Twitter
Instagram