[SOLVED] NR200P AIO

[StinkyEarTV]

Hello just a quick question! I currently have a cooler master NR200P case with the tempered glass side panel and the GPU riser. Is there any way a cooler master masterliquid ML240l RGB V2 will fit in the case with the GPU mounted on the bottom of the case?
This is my parts list: https://pcpartpicker.com/list/GPfdF8

 

[Phaaze88]

Cooler Master MasterBox NR200P Mini-ITX PC Case

The MasterBox NR200P uses features normally found in stylish, high-end ATX cases and cleverly utilizes space-saving measures to create a chassis taking up less than half the volume. Every feature is thoughtfully laid out in an 18-liter space to maximize component compatibility, thermal...

www.coolermaster.com

Radiator Support - Top: N/A
Radiator Support - Rear: 92mm (not compatible with vertical GPU installation)
Radiator Support - Bottom: 120mm, 240mm, (recommended for custom loops only)
[Radiator Support - Side: 120mm, 140mm, 240mm, 280mm, (not compatible with vertical GPU installation)]

 

[StinkyEarTV]

Cooler Master MasterBox NR200P Mini-ITX PC Case

The MasterBox NR200P uses features normally found in stylish, high-end ATX cases and cleverly utilizes space-saving measures to create a chassis taking up less than half the volume. Every feature is thoughtfully laid out in an 18-liter space to maximize component compatibility, thermal...

www.coolermaster.com

Radiator Support - Top: N/A
Radiator Support - Rear: 92mm (not compatible with vertical GPU installation)
Radiator Support - Bottom: 120mm, 240mm, (recommended for custom loops only)
[Radiator Support - Side: 120mm, 140mm, 240mm, 280mm, (not compatible with vertical GPU installation)]

So in theory if I mount the gpu on the bottom like on any other case, there should be enough room on the top to mount the 240mm radiator? Or will it only fit on the side? Because I have seen builds where they manage to fit it on the top just not sure if that’ll work with my selected parts

 

[Phaaze88]

Horizontal gpu + side mounted 240mm rad = Ok.

Because I have seen builds where they manage to fit it on the top

Well you should double check with those folks to be sure.
I'm not going to take a chance and say it's fine based on that alone... then you come back with, "It didn't fit."