oc adata xpg gaming v2.0 1600mhz stock to 1866mhz

[Hernanxr]

I would like to overclock my 1600mhz RAM to 1866 MHz, is safe? i have motherboard M5A97 LE E2.0 and FX 8320, what voltage and latency use for 1866mhz? possible with those memories?

http://www.adata.com/upload/ProductImage/productImage830.jpg

thanks

 

[Tradesman1]

Give it a try 1866 at 10-10-10-27 1.56

 

[Hernanxr]

1.56 or 1.5? stock ram is 1.5v

 

[Hernanxr]

Give it a try 1866 at 10-10-10-27 1.56

1.56 or 1.5? stock ram is 1.5v

 

[Tradesman1]

1.56, as you are OCing it above spec (it's perfectly safe). If all is well can try lowering the voltage - 0.01 at a time while checking for stability

 

[Hernanxr]

1.56, as you are OCing it above spec (it's perfectly safe). If all is well can try lowering the voltage - 0.01 at a time while checking for stability

if I use stock voltaje? on 1866mhz and latency 10 10 10 27?

 

[Tradesman1]

You can try, if it runs all is good, if not then will want to raise the DRAM voltage as mentioned. Just trying to save some steps, as we aren't even sure they can OC to 1866

 

[Hernanxr]

You can try, if it runs all is good, if not then will want to raise the DRAM voltage as mentioned. Just trying to save some steps, as we aren't even sure they can OC to 1866

ok, which program use to test the RAM?

 

[Tradesman1]

Performance test, Si-Sandra would prob be fine, for more exacting testing there's Memtest86 (can take hours, I normally only run about 4 passes

 

[Hernanxr]

Performance test, Si-Sandra would prob be fine, for more exacting testing there's Memtest86 (can take hours, I normally only run about 4 passes

what about Prime95 is good?

 

[Tradesman1]

Rather than Prime, I'd run ROG Real Bench

 

[Hernanxr]

Rather than Prime, I'd run ROG Real Bench

ok thansk for everthing