So I upgraded from a Asus Dual 1060 6gb to a Zotac Amp extreme 1070, the card works well but there is this quirk I noticed.
When I shut down or suspend the PC, once the monitor turns off, my monitors input automatically moves to HDMI2 (from HDMI1) as if I removed the HDMI cable. So when I turn on my PC I have to manually set my input back to HDMI1, not a huge deal but annoying. A fix I found was to disconnect the HDMI cable from the HDMI2 port directly on the back of the monitor. I did not experience any of these issues when I was still using my 1060.
Here's what ive done so far:
Rest of my PC specs
When I shut down or suspend the PC, once the monitor turns off, my monitors input automatically moves to HDMI2 (from HDMI1) as if I removed the HDMI cable. So when I turn on my PC I have to manually set my input back to HDMI1, not a huge deal but annoying. A fix I found was to disconnect the HDMI cable from the HDMI2 port directly on the back of the monitor. I did not experience any of these issues when I was still using my 1060.
Here's what ive done so far:
Test different HDMI cables
Uninstall NVIDIA drivers complete with DDU
Reseat the card from the mobo including the 2 8 pin cables
Reset my monitor settings (lg 25um58-p ultrawide)
Rest of my PC specs
i5-6600k (4.4 ghz at 1.35v)
Corsair H60i
G. Skill Ripjaws 2400mhz (16gb)
GTX 1070 Amp extreme edition
Gigabyte Z-170-d3hm
Seasonic m12ii 620 bronze 620w
Fractal define mini C