[SOLVED] One of my GPUs not detecting

[Gamer_DeepYT]

I have 1 RX580 8GB & a Rx560
And i have 2 monitors so i connected my monitor 1 to the rx580 and the 2nd monitor to the rx560
And i have been useing this setup for almost 3 years
Suddenly my 2nd monitor goes off and windows is not detecting my rx560 (2nd gpu)
And it's showing on the device maneger and msi after burner and i saw at after burner it says 0mhz on everything

My rx580 is working normally

I tried every solution i found on internet now i don't know what to do

And i used that gpu (rx560)to record/stream and i used to play games on my rx580 so this way i was not getting any noticeable performance drops while streaming/recording.

I upgraded fron rx560 to rx580 and was unable to find a buyer so i found a good use for that

And now it being not working i cant stream/record like before I'm getting soo much bad fps and quality.

Thank you guys in advance for helping ❤

 

[egda23]

When you take ou the 580 from the PC, an put the 560 in the 1rst PCIe slot, does it work as a normal GPU?

 

[Gamer_DeepYT]

When you take ou the 580 from the PC, an put the 560 in the 1rst PCIe slot, does it work as a normal GPU?

No

 

[DRagor]

You wrote 560 is shown in Device Manager. Any error code there?

 

[egda23]

No

Did you switch monitor, diplay cable, pCIe electric connections from PSU ?
What is the exact model of the PSU ?

 

[Gamer_DeepYT]

Th

You wrote 560 is shown in Device Manager. Any error code there?

There was an "⚠️" sign

 

[Gamer_DeepYT]

Did you switch monitor, diplay cable, pCIe electric connections from PSU ?
What is the exact model of the PSU ?

I checked everything everything is okay and working like normal with my rx580.

 

[DRagor]

There was an "⚠" sign

Double click it and check what error code is written in status.

 

[Gamer_DeepYT]

Double click it and check what error code is written in status.

Windows has stopped this device because it has reported problems. (Code 43)

 

[Jacob 51]

Windows has stopped this device because it has reported problems. (Code 43)

Try exchanging the 6 pin power cables from the GPU
If that isn't working,
The driver may be crashing. Try to reinstall it.
Did you do any overclocking?

 

[Gamer_DeepYT]

Try exchanging the 6 pin power cables from the GPU
If that isn't working,
The driver may be crashing. Try to reinstall it.
Did you do any overclocking?

I have a Rog Strix Rx560 that doesn't need extra power

And i used ddu and reinstalled drivers (gonna try again today)

I did a stable overclock on my rx580 and i stress tested and bentchmarked for 24hrs everything was okay.

But the OC was not running for 4-5 days cuz i felt like i don't need it

 

[Gamer_DeepYT]

Did you switch monitor, diplay cable, pCIe electric connections from PSU ?
What is the exact model of the PSU ?

I'm useing Gigabyte P550B 550watt 80+Bronze PSU

 

[DRagor]

Windows has stopped this device because it has reported problems. (Code 43)

If reinstalling drivers didn't fix that then your rx560 is most likely dead.

 

[Gamer_DeepYT]

If reinstalling drivers didn't fix that then your rx560 is most likely dead.

Yaaaaay it got fixed ☺✌🏽Thank you everyone ❤